VY Dash in VX
Author
Discussion

madmunky

Original Poster:

631 posts

211 months

Wednesday 3rd December 2008
quotequote all
One of the things I would like to do is update my dash in the VX with the Digital one out of a VY, Does anyone know if this has been done before or any links to details about this?

ringram

14,701 posts

271 months

Wednesday 3rd December 2008
quotequote all
I would suggeset that the BCM would be different, that will drive the display and would doubt that the older BCM would do that. Wiring loom might also be different. Check out ls1.com.au someone there will know for sure.

madmunky

Original Poster:

631 posts

211 months

Wednesday 3rd December 2008
quotequote all
Is it actually called a VY dash? not something like a gen III etc..?

motomk

2,186 posts

267 months

Wednesday 3rd December 2008
quotequote all
I am guessing you mean the 3 window dashes for the VT and VX cars??? They were available on the HSV cars and the upmarket Holdens (Calais, Statesman)
This is for a VX clubsport Automatic and will fit a VT and VX.
http://holmart.com.au/online/prod46.h

This is from a VX clubpsort Manual
http://holmart.com.au/online/prod47.h

And a VT senator Manual
http://holmart.com.au/online/prod613.

I have the top one in my VTII SS....the speedo goes higher than a normal Holden one. I believe you have to get the dash reprogrammed. There is some wierd thing with them to do with being over 100km on the dash, you cannot reset it or that used to be the case before the "tuning" programs came along.
Other colours were available from the early Monaros, like Yellow and green.

The cheapest 3 window ones to get are the Calais ones, they only come in Auto though and 220kmh speedo and I think blacky/grey only.

Of course if you have a later 2004/05 Monaro then this is all irrelevant. I couldn't find your car as the search thingy is mis-behaving.



madmunky

Original Poster:

631 posts

211 months

Wednesday 3rd December 2008
quotequote all
I have the VT-VX one at the moment but want to fit a VY Ser 11 one like this

http://holmart.com.au/online/prod44.htm

I perfer the ones in the later monaros and Its nice to have the MPH show in the digital display..

After speaking with Roger though it looks like mega surgry would be needed to it would be inpractical frown

motomk

2,186 posts

267 months

Wednesday 3rd December 2008
quotequote all
madmunky said:
I have the VT-VX one at the moment but want to fit a VY Ser 11 one like this

http://holmart.com.au/online/prod44.h

I perfer the ones in the later monaros and Its nice to have the MPH show in the digital display..

After speaking with Roger though it looks like mega surgry would be needed to it would be inpractical


Yes would involve a lot of effort changing the whole dash over including the centre too.