Radio Removal Tool

[MyM8V8]

Hi Guys, & Mel, where can I get one of these from, quickly. Thanks.

[S600VXR]

My toolbox... used 4 drill bits, push in, wiggle a bit and pull out. Note the rear electrical connector is what stops it coming out easy once the drills are pressed in to push the tabs back as its quite a tight fitting plug. I can picture the radio out if that helps...? Mines sat on the coffee table in the lounge!

[S600VXR]

My toolbox... used 4 drill bits, push in, wiggle a bit and pull out. Note the rear electrical connector is what stops it coming out easy once the drills are pressed in to push the tabs back as its quite a tight fitting plug. I can picture the radio out if that helps...? Mines sat on the coffee table in the lounge!

[MyM8V8]

Cheers mate, I'm back down to the w'shop to try it, although I'll probably use four welding rods if you only have to push them in.

[C8PPO]

Ah, I was waiting to ask the same question, assuming Santa brings me the in-line FM modulator which I carefully pointed out!

[cv8 mike]

I picked up a set of these from my Halfrauds equivalent type shop in town. Halfrauds didnt sell anything like them at all.

www.celsusice.co.uk/product_details.aspx?Product_code=RK5012

These worked a treat.

I tried with four screwdrivers but couldnt get enough grip to pull the unit out.

Edited by cv8 mike on Thursday 18th December 20:33

[donk vxr]

Four short lengths of wire and it worked very well, had to take mine out today to take dashboard facia off and change head unit to mph...

[stevemj]

I have a pair in my toolbox - you can borrow them if you want.

Post a note on here by lunchtime and I could pop them in the post.

Steve

[MyM8V8]

stevemj said:

I have a pair in my toolbox - you can borrow them if you want.

Post a note on here by lunchtime and I could pop them in the post.

Steve

Thanks for the thought. All done and dusted now. Welding rods it was.