New Generation Superchargers - Special Offer

[Rapidgb]

Special Offer for LS1, LS2 and LS3

If you have a supercharger kit that has been fitted to any LSXXX engine in the last 4 years and want to take advantage of our brand new TVS 1900 or 2300 Magnacharger Kit " The New Generation"...we are prepard (As long as it fits the criteria) to take your old kit in as part exchange on the new generation of superchargers, so where you have a Magnacharger (112 or 122), Vortech, Whipple or Harrop etc...give us a call and see what we can do.

If you just want the new kit have no part ex the cost fitted,dyno'd, tuned and inc vat £6,043.00 complete.

Cheers

Rapid GB

[Drew SS]

do u have a direct debt service

[SimonV8ster]

Drew SS said:

do u have a direct debt service

direct debt or direct debit ?? or do they ultimately become the same thing ?!

[Drew SS]

SimonV8ster said:

Drew SS said:

do u have a direct debt service

direct debt or direct debit ?? or do they ultimately become the same thing ?!

id say they could become the same after awhile

[after_shock]

Are the 1900 and 2300 the same price?

[Rapidgb]

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

[granada203028]

Rapid GB, I have a few questions. I have an 05 CV8 with the LS1. Stock apart from the shorter M12 ratio gearbox and no middle boxes in the exhaust.

What power and torque % increase can be expected with the TVS1900?
What boost PSI does it run?
Are any of the existing parts modified such as airbox etc?
The parts removed and not needed would remain my property?
How loud or noticeable is the wine?
Is a camshaft change included, if not, would this be worth while?

Thanks

Paul

[after_shock]

Rapidgb said:

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

I would be interested to see the heads/cams prices when they are up!

[higgster5.7]

Rapidgb said:

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

Hi Mark, what sort of cam kits are you offering

[crisisjez]

Rapidgb said:

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

Whats the spec of your clients 800RWHP Monaro? sounds like an interesting beast.

[Bonnie and Clyde]

crisisjez said:

Rapidgb said:

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

Whats the spec of your clients 800RWHP Monaro? sounds like an interesting beast.

Oh Dear

[doleboy]

crisisjez said:

Rapidgb said:

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

Whats the spec of your clients 800RWHP Monaro? sounds like an interesting beast.

What's this Jez, one for each foot, or has Sophie had enough of the Astra?

[Rapidgb]

crisisjez said:

Rapidgb said:

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

Whats the spec of your clients 800RWHP Monaro? sounds like an interesting beast.

TBO crisisjez why are you interested? Anything we say on here is slated, whether it be dyno's, tuning, engine builds etc ...funny enough I have just noticed that are competitors are now selling TVS blower kits from Magnuson, who only not so long ago (along with yourself) could not understand/believe the figures that these great kits can produce and they only sold Harrop, what a turn around.....!!!I must now state that we are the ONLY OFFICAL MAGNUSON UK SUPPLIER, and therefore we are the only people in the UK who can fit and tune these cars with Magnusons Warrenty Backup.

---

Moderators edit

I have been contacted by the supplier you seem to be talking about "Monkfish Performance" and they have asked to make sure people know that they have NEVER posted on this or any other forum commenting on the TVS superchargers performance.........

I think this is the correct place to post this statement?

Edited by uk hsv on Friday 7th August 17:03

[Drew SS]

mark do u do exchange + dollars on new and bigger engines mate would be keen on that alright have an ls1 at the moment...Andy

[TerryS]

Mark what is you cam install price please, or would you rather I called?

[crisisjez]

doleboy said:

crisisjez said:

Rapidgb said:

Hi,

They are to same price, we are offering these kits at these's prices as the dollar has now allowed us some movement so we are passing the exchange rate on, so we can offer the best possible prices going.

We are also offering a full Defilippo Exhaust System 1 7/8 Headers, 100 cell hi-flow cats and a 3 inch complete system for £ 3500.00 all in.

If your are after an uprated clutch we recommend a Spec 3+ clutch and alu flywheel for £ 750.00 all in or a LS7 clutch £759.00 all in, the choice is yours. Our clients Monaro thats runs at 800rwhp has a spec 3+ clutch fitted and it has now covered over 30,000 miles.

We are also launching our new prices for Cams, Heads, and strokers.....special prices on 427 and 454 builds, and believe me it's alot cheaper than you think...


Keep checking our web site as it's being updated everyday

Rapid GB

Whats the spec of your clients 800RWHP Monaro? sounds like an interesting beast.

What's this Jez, one for each foot, or has Sophie had enough of the Astra?

Fat chance, we can`t go any bigger powerwise without internals, which is a spend too far (TBO I`d rather try and get her into a C4S as I think she`d be a bit safer).

re the above, I`m just interested as its kinda what Im doing at the moment, so wouldn`t you be?.

Wish I hadn`t asked now though

[S600VXR]

Seconds out - round 2....


454..... hhhmmmmmmmmmmmmmmmm..........

[Drew SS]

S600VXR said:

Seconds out - round 2....


454..... hhhmmmmmmmmmmmmmmmm.......... :woohoo:

i was thinkin alomg the same lines for the ute

[ringram]

I run the difilippo on my feeble vehicle, its rated the best in Oz.
Dual 3" for up to 750fwhp IIRC.

Stokers sound interesting. Ill take a look

[tiler]

Sum one will get shot down very soon.
The end