My Stroker Rebuild Pt 1&2
Discussion
Having broken my stock motor Ive decided that the reason was the stock fueling system being stretched when on full chat. As such its time to look at what I can afford to do and do it in stages.
Stage 1:
Had a look at the APS drop in (after a fashion!) fuel upgrade system and had it confirmed that this is a very good idea, going to order the end of the month and fit myself before dropping the car to anyone for the engine work. http://www.airpowersystems.com/gto/fuel/apsgto-fss...
The advantage of this is that I can upgrade it to a 1000hp capable system later if needed. Im also going to relocate the large K&N filter somewhere more apropriate outside of the engine bay!
Stage 2:
402ci forged block plus full ARP stud and bolt kit with all my other bits bolted on including the Maggie 122 for the time being - power to be limited to something close to what I had previously untill Stage 3 sometime early next year due to limits with the 122 with a stroker. (if anyone wants to make me an offer over 3.5k though for the full SC setup I may let it go early
)
Stage 3:
TVS2300 and a lumpy cam along with a multiplate clutch to cope. Being realistic IL be happy with 600ish WHP from this as Im not spending out on new heads of flowing mine since Im forcing air in and keeping the valves open longer to let it in so dont think Id get a big enough increase to justify the costs. Have to wait and see what its like though.
Once this it done IL look at the diff and drive shafts if they dont brake beforehand and also some replacement seats for the front.
Would like to have gone as big as Richard along with a TVS2300 but I simply cant afford it so this will have to do. I also know there are a huge number of options out there but I wanted something usable and realiable. Cheers to the guys who have given me advise so quick as its already annoying me not having it available for use!
Stage 1:
Had a look at the APS drop in (after a fashion!) fuel upgrade system and had it confirmed that this is a very good idea, going to order the end of the month and fit myself before dropping the car to anyone for the engine work. http://www.airpowersystems.com/gto/fuel/apsgto-fss...
The advantage of this is that I can upgrade it to a 1000hp capable system later if needed. Im also going to relocate the large K&N filter somewhere more apropriate outside of the engine bay!
Stage 2:
402ci forged block plus full ARP stud and bolt kit with all my other bits bolted on including the Maggie 122 for the time being - power to be limited to something close to what I had previously untill Stage 3 sometime early next year due to limits with the 122 with a stroker. (if anyone wants to make me an offer over 3.5k though for the full SC setup I may let it go early
)Stage 3:
TVS2300 and a lumpy cam along with a multiplate clutch to cope. Being realistic IL be happy with 600ish WHP from this as Im not spending out on new heads of flowing mine since Im forcing air in and keeping the valves open longer to let it in so dont think Id get a big enough increase to justify the costs. Have to wait and see what its like though.
Once this it done IL look at the diff and drive shafts if they dont brake beforehand and also some replacement seats for the front.
Would like to have gone as big as Richard along with a TVS2300 but I simply cant afford it so this will have to do. I also know there are a huge number of options out there but I wanted something usable and realiable. Cheers to the guys who have given me advise so quick as its already annoying me not having it available for use!
eta Q2 2010?
FWIW Id be tempted with a suitable cam at stage 2. Or do you think the blower wont even move enough air to provide any boost at all?
This dude comes close http://www.ls1.com.au/forum/showthread.php?t=10804...
Maybe its just shy of your 600rwhp goal!?
Also are you implying an engine repair at stage 1, or is that purely in preparation for stage 2 and a trailer?
Finally where is the engine coming from? Your old block? If so I understand the displacement "problem", if not then why not use an LS3 block and get 416 cubes? Cost is virtually identical.
FWIW Id be tempted with a suitable cam at stage 2. Or do you think the blower wont even move enough air to provide any boost at all?
This dude comes close http://www.ls1.com.au/forum/showthread.php?t=10804...
Maybe its just shy of your 600rwhp goal!?
Also are you implying an engine repair at stage 1, or is that purely in preparation for stage 2 and a trailer?
Finally where is the engine coming from? Your old block? If so I understand the displacement "problem", if not then why not use an LS3 block and get 416 cubes? Cost is virtually identical.
Having done this myself I feel I am qualified to comment.
Stage 1
First get your engine stripped and rebuilt with forged internals, a stroker crank is a good idea as it will offer loads of torque and will be a weak point if you don't replace it. Add a cam and heads, fuel system, then bolt your 122 back on.
Stage 2
Add big headers and a 3 inch exhaust and upgrade to 2300 or some other method of FI.
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
Stage 1
First get your engine stripped and rebuilt with forged internals, a stroker crank is a good idea as it will offer loads of torque and will be a weak point if you don't replace it. Add a cam and heads, fuel system, then bolt your 122 back on.
Stage 2
Add big headers and a 3 inch exhaust and upgrade to 2300 or some other method of FI.
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
wormus said:
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
Interesting comment, in my gains for power I may well be better off going the cam/heads route as opposed to changing the charger and upping the boost?
after_shock said:
wormus said:
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
Interesting comment, in my gains for power I may well be better off going the cam/heads route as opposed to changing the charger and upping the boost?
For power? Yes, absolutely although beyond a point you need forged internals to handle it. Always fit cam and heads first.
wormus said:
Having done this myself I feel I am qualified to comment.
Stage 1
First get your engine stripped and rebuilt with forged internals, a stroker crank is a good idea as it will offer loads of torque and will be a weak point if you don't replace it. Add a cam and heads, fuel system, then bolt your 122 back on.
Stage 2
Add big headers and a 3 inch exhaust and upgrade to 2300 or some other method of FI.
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
Not wanting to argue.Stage 1
First get your engine stripped and rebuilt with forged internals, a stroker crank is a good idea as it will offer loads of torque and will be a weak point if you don't replace it. Add a cam and heads, fuel system, then bolt your 122 back on.
Stage 2
Add big headers and a 3 inch exhaust and upgrade to 2300 or some other method of FI.
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
IMO, a stroker crank is not necessary, if fitting a PD style blower. You'll already have access to massive torque.
The standard crank has been proven well beyond 1000bhp....so whoever said it is a weak point, doesnt know too much. In fact...I dont know of anyone who has broken one.
His cheapest build by far would be just to forge the 5.7
But at the same time, I would agree that why not chuck in a 4" crank at the same time, if budget allowed.
Although if budget allowed, I'd opt for a complete new shortblock based around an LS2, or maybe LS3 platform.
And your last statement is only partially true. The reason you make the same boost with a better flowing engine...is because you must be spinning the blower a lot faster.
Remember, the boost seen is only how restrictive the engine is.
But obviously you want the engine to be as efficient as possible. Less boost with the same power is good !!
Use good heads, choose a sensible cam, and it makes a better, safer package.
To a point....if you had a 5.7 and a 7.0 with the same supercharger. Ultimately, the supercharger would govern how much power the engine made. If you ram in 800bhp of air...both engines will make near enough the same peak power, just deliver it in different ways
Ive went from a 6.3 to a 5.7, with nothing else changing at one time. At the track, the car performed almost the same. Although low end torque was the most noticable difference.
The 5.7 almost felt gutless compared to the 6.3 That said...on a slippery track ( Elvington ), I ran my best times with that 5.7, purely down to it offering more traction !!
The torque does feel good though.
I agree and that was my point, it's not the level of boost that determines power but the air flowing through the engine.
His is an LS2 and I have it on good authority the standard cranks bend beyond 700hp. Anyway, why stick with a standard crank when you are replacing everything else?
His is an LS2 and I have it on good authority the standard cranks bend beyond 700hp. Anyway, why stick with a standard crank when you are replacing everything else?
I thought this would generate alot of discussion
. As Ive already said there are numerous options out there and opinions. Since I know little about these engines really Im taking advise from people who know and limiting things were my finances dictate. I am most likely using my block so long as its not to badely damaged, no one said the crank is weak, I just fancy having something bigger than stock and 402 seems ideal since the bore does not change. Its also very well saying the price is almost the same as a new LS3 but each increase adds to the overall budget and it ends up costing far more than orriginally planned - been there done that when I blew over 20k on a bike engine and ended up with an unridable monster for the road, wont be doing that again. For god sake around 700hp is more than any supercar has bar a very small handfull so Im getting performance past what I ever dreamed off in a car... unless I win the lottery anyhow!
Now Bonnie - make up with Wormus. We dont want any ill feeling on the board.
. As Ive already said there are numerous options out there and opinions. Since I know little about these engines really Im taking advise from people who know and limiting things were my finances dictate. I am most likely using my block so long as its not to badely damaged, no one said the crank is weak, I just fancy having something bigger than stock and 402 seems ideal since the bore does not change. Its also very well saying the price is almost the same as a new LS3 but each increase adds to the overall budget and it ends up costing far more than orriginally planned - been there done that when I blew over 20k on a bike engine and ended up with an unridable monster for the road, wont be doing that again. For god sake around 700hp is more than any supercar has bar a very small handfull so Im getting performance past what I ever dreamed off in a car... unless I win the lottery anyhow!Now Bonnie - make up with Wormus. We dont want any ill feeling on the board.

stevieturbo said:
wormus said:
Having done this myself I feel I am qualified to comment.
Stage 1
First get your engine stripped and rebuilt with forged internals, a stroker crank is a good idea as it will offer loads of torque and will be a weak point if you don't replace it. Add a cam and heads, fuel system, then bolt your 122 back on.
Stage 2
Add big headers and a 3 inch exhaust and upgrade to 2300 or some other method of FI.
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
Stage 1
First get your engine stripped and rebuilt with forged internals, a stroker crank is a good idea as it will offer loads of torque and will be a weak point if you don't replace it. Add a cam and heads, fuel system, then bolt your 122 back on.
Stage 2
Add big headers and a 3 inch exhaust and upgrade to 2300 or some other method of FI.
Make no mistake, the power comes from the cam and heads, not squashing in more boost. Mine gained 200hp at the wheels on the SAME boost with the same blower. Your 122 will still make great power.
Not wanting to argue.
IMO, a stroker crank is not necessary, if fitting a PD style blower. You'll already have access to massive torque.
The standard crank has been proven well beyond 1000bhp....so whoever said it is a weak point, doesnt know too much. In fact...I dont know of anyone who has broken one.
His cheapest build by far would be just to forge the 5.7
But at the same time, I would agree that why not chuck in a 4" crank at the same time, if budget allowed.
Although if budget allowed, I'd opt for a complete new shortblock based around an LS2, or maybe LS3 platform.
And your last statement is only partially true. The reason you make the same boost with a better flowing engine...is because you must be spinning the blower a lot faster.
Remember, the boost seen is only how restrictive the engine is.
But obviously you want the engine to be as efficient as possible. Less boost with the same power is good !!
Use good heads, choose a sensible cam, and it makes a better, safer package.
To a point....if you had a 5.7 and a 7.0 with the same supercharger. Ultimately, the supercharger would govern how much power the engine made. If you ram in 800bhp of air...both engines will make near enough the same peak power, just deliver it in different ways
Ive went from a 6.3 to a 5.7, with nothing else changing at one time. At the track, the car performed almost the same. Although low end torque was the most noticable difference.
The 5.7 almost felt gutless compared to the 6.3 That said...on a slippery track ( Elvington ), I ran my best times with that 5.7, purely down to it offering more traction !!
The torque does feel good though.
OK, I'll ask.
If cam and/or head mods improve the VE capability of an engine that was being blown through by an SC, wouldn't that reduce the boost of the SC (I.e. Less back pressure from the SC's perspective and yet increase power at the same time?
Yes, stick with your standard block. It worked out the cheapest for me but takes longer.
Mine is about the only engine on here not built by Pete Knight (although he supplied lots of bits). To say I'm thrilled is an understatement. It goes like a mad thing but will potter around town on part throttle too. It's an amazing achievement. Yours will still be great with a 122, it has loads of puff.
Speak to the people who know as my experiences have been realised through Mark's advice and knowledge. I'm sure Roger at the Fish will also be able to help. Speak to them.
Mine is about the only engine on here not built by Pete Knight (although he supplied lots of bits). To say I'm thrilled is an understatement. It goes like a mad thing but will potter around town on part throttle too. It's an amazing achievement. Yours will still be great with a 122, it has loads of puff.
Speak to the people who know as my experiences have been realised through Mark's advice and knowledge. I'm sure Roger at the Fish will also be able to help. Speak to them.
Yes 
Air temps drop as do paracytic losses from compression, so its a winning situation.
Roger. Agreed on the block, use yours if its most cost effective. I thought you might be buying a new one.
Also if you want something driveable, be careful on the cam, something mild in the 22x/23x range will be very driveable in the 402. Lift is good.
Whats your ETA?

Air temps drop as do paracytic losses from compression, so its a winning situation.
Roger. Agreed on the block, use yours if its most cost effective. I thought you might be buying a new one.
Also if you want something driveable, be careful on the cam, something mild in the 22x/23x range will be very driveable in the 402. Lift is good.
Whats your ETA?
Good advice on the cam although power delivery is everything. Mine was retarded 4 degrees because torque was BAM! at 2500 rpm and unstuck the rear tyres instantly.
Now the delivery is much softer but I have more top end power. It's more like a massive NA motor. What feels faster isn't in a lot of cases.
Now the delivery is much softer but I have more top end power. It's more like a massive NA motor. What feels faster isn't in a lot of cases.
The fun part is specifying all the stuff and planning it. Paying for it isnt quite so good. But hands down the worse part is WAITING for it all to get done. Im sure Jez can comment on that 
My engine took 8 months! Lucky it didnt soak in the fishtank for too long, though its been back a few times for various things that bust or fall off..
PS: Im with wormy. I dont really think you will need the TVS hence why I think you should fit the final cam with the 122. You might find thats fine and there is no point upgrading the blower.. Stage 3 might not be required. You can save your money for something else. Like some cheap stock LS3 heads

My engine took 8 months! Lucky it didnt soak in the fishtank for too long, though its been back a few times for various things that bust or fall off..
PS: Im with wormy. I dont really think you will need the TVS hence why I think you should fit the final cam with the 122. You might find thats fine and there is no point upgrading the blower.. Stage 3 might not be required. You can save your money for something else. Like some cheap stock LS3 heads

Edited by ringram on Thursday 13th August 22:53
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




