Little Thunder Road video

[marty359]

Thanks for a great day last weekend,i managed 160mph in the C32(on speedo)

Heres a little vid of the day

www.viddyou.com/viddstream?videoid=73866

[kaw]

nice video mate ,my r8 you were up with

[MyM8V8]

kaw said:

nice video mate ,my r8 you were up with

Great run Rick. Just get rid of the maf now for a bit extra up top. Tweek tweek.

[kaw]

have emailed us about otr sure,you can,t get a head and cam kit under your arm

[MyM8V8]

kaw said:

have emailed us about otr sure,you can,t get a head and cam kit under your arm

Doubt the heads. Cam maybe, depending on how heavy my gearbox bits are.

I will be having a Monkfish Magic cam going spare soon anyway. Would that be any good to you?

When you get the OTR on (and the tune trimmed for it, you may want to try ringrams trick - 1.8 rocker arms first.

As he keeps reminding us: He got 360 rwhp with FAST intake, otr, mafless and 1.8 rockers and I think that was on an LS1 with no cam? This could prove one school of thought correct,i.e in that small cams with higher lift work in these motors.

Being as DonkR8 is at 337rwhp (on SRR's dyno) with just an otr and no tune, you can see where you could be with the above at (relatively) very little effort/expense.

Don't worry about the headers,as I'm not convinced LT headers are optimally effective with cams with no overlap, and again I cite Donks impressive figures, which say more about where to start with these motors than anything else.

[Magic919]

MyM8V8 said:

As he keeps reminding us: He got 360 rwhp with FAST intake, otr, mafless and 1.8 rockers and I think that was on an LS1 with no cam?

LS2 in VXR8 but no FAST as I recall.

My LS3 did 350HP at Charlie's today with Orssom OTRCAI and no tune.

[kaw]

thought rocker arms were prone to break .as for cam can you re use it in a different motor if yes then we could try it mate.still like to get as close to 400 rwhp in the end.you might not have to look in your mirror at the next meet to c me . I,M COMING TO GET YA

[after_shock]

kaw said:

thought rocker arms were prone to break .as for cam can you re use it in a different motor if yes then we could try it mate.still like to get as close to 400 rwhp in the end.you might not have to look in your mirror at the next meet to c me . I,M COMING TO GET YA

Who did the remap on yours?

[Bonnie and Clyde]

kaw said:

thought rocker arms were prone to break .as for cam can you re use it in a different motor if yes then we could try it mate.still like to get as close to 400 rwhp in the end.you might not have to look in your mirror at the next meet to c me . I,M COMING TO GET YA

yeah G watch your back

Rick just dont SC it

Edited by Bonnie and Clyde on Saturday 24th October 20:48

[kaw]

sorry at the moment can,t say,but the guy that did the job may well get in touch with you its his call.not being funny but been asked not to say at this time.but the proof is 12.9 1/4 mile with little esle done to car

[Bonnie and Clyde]

kaw said:

sorry at the moment can,t say,but the guy that did the job may well get in touch with you its his call.not being funny but been asked not to say at this time.but the proof is 12.9 1/4 mile with little esle done to car

tweek tweek

[Magic919]

Since we like our pics on here. LS3 and OTRCAI.

[after_shock]

kaw said:

sorry at the moment can,t say,but the guy that did the job may well get in touch with you its his call.not
being funny but been asked not to say at this time.but the proof is 12.9 1/4 mile with little esle done to car

Be good if he did, need one doing in a couple of weeks

[MyM8V8]

Magic919 said:

MyM8V8 said:

As he keeps reminding us: He got 360 rwhp with FAST intake, otr, mafless and 1.8 rockers and I think that was on an LS1 with no cam?

LS2 in VXR8 but no FAST as I recall.

My LS3 did 350HP at Charlie's today with Orssom OTRCAI and no tune.

No, you're right, the FAST was on his LS1.

That's "awesome" mate. You still have doubts about your 1/4 at TR? You still have more to gain. Ditch the maf and get it tuned accordingly. Is that the same intake as Donk's?

[MyM8V8]

kaw said:

thought rocker arms were prone to break .as for cam can you re use it in a different motor if yes then we could try it mate.still like to get as close to 400 rwhp in the end.you might not have to look in your mirror at the next meet to c me . I,M COMING TO GET YA

Apparently the earlier Yella terras were heavy and had issues IIRC. I believe the latest ultralites are OK. That's what I run, and the top builder in the states runs the 1.8's to 7500rpm on his big stroker LS motors with full race cams.

Any valvetrain setup needs to be matched to work, and you don't have to re-invent the wheel to get one.

Having said that the standard GM rockers stand up very well to high HP builds and Tinker 27 swears by them in his motors, but I don't think you can get the ratios other than 1.7.

[MyM8V8]

Magic919 said:

Since we like our pics on here. LS3 and OTRCAI.

Lovely torque, and the HP doesn't look as though it's dropped off yet. Well done.