Front Fog Light Cover
Discussion
Only £60 from Walkinshaw if its just the add on covers that are broke.
http://www.walkinshawperformance.co.uk/wp/2008/uk/...
http://www.walkinshawperformance.co.uk/wp/2008/uk/...
Buy a sheet of Lamin-x and put that over the lense before you fit the new lamp.
http://www.lamin-x.co.uk/shop/clear.htm
http://www.lamin-x.co.uk/shop/clear.htm
I bought a couple from the fish in the summer. You don't get much change from £300. They are held in by 4 cross point screws. If they are rusted in you have a bit of a job on as the heads crumble and the best way to get at them is to take the bumper off. You may have to grind the heads off. Best to replace the screws with hex head screws.
baptist said:
Thanks for the advice.
Anyone fitted one of these, I take it you can access from behind bumper, and not have to remove it??
Anyone fitted one of these, I take it you can access from behind bumper, and not have to remove it??
The only problem I had fitting mine was getting a trolley jack under the car, i put 2 wheels on the kerb in the end, the screws holding in the fog light are cross head but they are also bolt headed, I think they are either a 8 or 10mm spanner, mine came off no problem.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




Must learn to read properly