Dirty Contacts
Author
Discussion

breaker morant

Original Poster:

140 posts

230 months

Sunday 31st January 2010
quotequote all
Bet that made you pay attention.

Front indicator is faulty, have cleaned the bulb and contact inside the housing, it works for a while and then goes on the blink (excuse pun) again. However the side repeater continues working.

Any suggestions to cure/likely cause?

(BTW this is not the monaro but the 2nd car runaround).

I thank you.

ARAF

20,759 posts

254 months

Sunday 31st January 2010
quotequote all
If the bulb holder was corroded, then I suppose you could also be suffering from a bad earth. Run a temporary earth lead to a good grounding point - just to see if that's the problem.