Change of Diff.................
Change of Diff.................
Author
Discussion

SimonV8ster

Original Poster:

13,035 posts

259 months

Tuesday 30th March 2010
quotequote all
As a performance upgrade on my CV8 I'm thinking about the diff change.

Just wondering if the diff out of an early VXR would be a good 'half-way-house' between the 3.9.1 option ?

I'm sure this would be a dam bit cheaper than the other option if I got one out of a broken VXR.

At TR I managed 150 constantly but my 1/4 times were poo. What would the lower diff do to my terminal speed if anything ? Not too fussed about 1/4 mile times.

monkfish1

12,516 posts

255 months

Tuesday 30th March 2010
quotequote all
It would be a good halfway house. Bolts straight in. Just need to alter the speedo to suit.

delmeekc

1,205 posts

241 months

Tuesday 30th March 2010
quotequote all
I was about to write lots of crap about my diff but your talking about gearing I think not the actual diff?

SimonV8ster

Original Poster:

13,035 posts

259 months

Tuesday 30th March 2010
quotequote all
Well I'm talking about a cheaper alternative to get an 'acceleration increase' other than cams/heads/ etc.

A simple swap of a diff to make it feel a little mor elively through the gears. Not acctually commenting on the quality of the diff itself if thats what you mean ?

delmeekc

1,205 posts

241 months

Tuesday 30th March 2010
quotequote all
I'm sure a pinion and bevel ring gear are not cheap to change, would it not be worth checking what upgrades you can get for the same money. I'm sure someone can cost performance mods to match a gear change and see how it looks.

nosubstitute

750 posts

213 months

Tuesday 30th March 2010
quotequote all
Just had the 3.9:1 diff fitted by Monkfish and the effect on the feel of the car in terms of acceleration is very noticeable especially in 4th and 5th gear. I would definately recommend going to a 3.9:1 if you can.

delmeekc

1,205 posts

241 months

Tuesday 30th March 2010
quotequote all
No, I would recommend 10 psi vortech and a forged engine.

SimonV8ster

Original Poster:

13,035 posts

259 months

Tuesday 30th March 2010
quotequote all
delmeekc said:
No, I would recommend 10 psi vortech and a forged engine.
Theres a slight difference in price wink

behold81

2,931 posts

200 months

Tuesday 30th March 2010
quotequote all
SimonV8ster said:
delmeekc said:
No, I would recommend 10 psi vortech and a forged engine.


Theres a slight difference in price


But which would you rather???

granada203028

1,500 posts

228 months

Sunday 4th April 2010
quotequote all
SimonV8ster said:
As a performance upgrade on my CV8 I'm thinking about the diff change.

Just wondering if the diff out of an early VXR would be a good 'half-way-house' between the 3.9.1 option ?

I'm sure this would be a dam bit cheaper than the other option if I got one out of a broken VXR.

At TR I managed 150 constantly but my 1/4 times were poo. What would the lower diff do to my terminal speed if anything ? Not too fussed about 1/4 mile times.


Just changing from the 3.46 to a 3.7 is a lot of trouble to go to for just 7% extra acceleration. Obviously with a 3.9:1 you get 13% for the same work and cost. I still argue changing the box is better from the TUET2100 (CV8 type) to the TUET2066 (6.0VXR type). Now a few 6.0VXRs have met their end gearboxes should start to appear 2nd hand. Changing the box doesn't effect the speedo so is a DIY proposition.

I changed just the crown wheel and pinion on the Ford 9 in axle in my 72 Mustang. This was fairly straight forward and only cost £200.

SimonV8ster

Original Poster:

13,035 posts

259 months

Sunday 4th April 2010
quotequote all
Cost came into it as well as the lower ratio diff is 1500 quid but a second VXR diff is about 500.

What difference would a 6.0 VXR gearbox make ?

gsd2000

11,515 posts

214 months

Sunday 4th April 2010
quotequote all
Granada how much did an 06 vxr box cost you as i need to repair my 04 cv8 box.

crisisjez

9,209 posts

236 months

Sunday 4th April 2010
quotequote all
Deffo put the M12 in if you can Big G.
Why not drop Raving a PM, if you repair your M6 you can offset the cost by selling it.

gsd2000

11,515 posts

214 months

Sunday 4th April 2010
quotequote all
crisisjez said:
Deffo put the M12 in if you can Big G.
Why not drop Raving a PM, if you repair your M6 you can offset the cost by selling it.


forgot about raving, i will email him and see what he says

crisisjez

9,209 posts

236 months

Sunday 4th April 2010
quotequote all
SimonV8ster said:


I'm sure this would be a dam bit cheaper than the other option if I got one out of a broken VXR.



As if by magic............
http://cgi.ebay.co.uk/Vauxhall-Holden

granada203028

1,500 posts

228 months

Sunday 4th April 2010
quotequote all
I paid approx £2200 all in for a new one, importing it myself from "Regal Performance" in Texas. Pound was better 3 years ago though. So look on eBay including the USA and OZ sites. Another option is www.gmpartsdirect.com, gm part number is 92155485. What ever it says on it or it's history do check at least first is the correct ratio, 2.97:1 which is nearly 3:1, e.g. input goes round 3 times for the output once.

Overall improvement is similar to a 3.9:1 diff though the spread is different. 2nd is the most different 16% shorter, 3rd the least at 10%.

If you are having a box rebuilt then maybe you can just have the gear cluster changed.

gsd2000

11,515 posts

214 months

Sunday 4th April 2010
quotequote all
Are the ratios for 4th, 5th and 6th the same?

crisisjez

9,209 posts

236 months

Sunday 4th April 2010
quotequote all
gsd2000 said:
Are the ratios for 4th, 5th and 6th the same?

5th and 6th are better.

granada203028

1,500 posts

228 months

Sunday 4th April 2010
quotequote all
I think the design of the gearbox means 4th is inherently the same 1:1. Both 5th and 6th are shorter. In my view 5th on the old box is actually better as it sits more evenly between 4th and 6th and is better judged for achieving maximum speed without over revving the engine. This is a relatively minor negative though.

A thread on here last year was claiming Vauxhall were selling off the gearboxes cheap, even £700 might have been mentioned but I don't think anyone reported buying one. A bit difficult to believe but probably still worth a phone call.

Researching the TR6060 or the vin code M10 (VXR8)version of the T56 worth while to.

crisisjez

9,209 posts

236 months

Sunday 4th April 2010
quotequote all
granada203028 said:
In my view 5th on the old box is actually better as it sits more evenly between 4th and 6th and is better judged for achieving maximum speed without over revving the engine.


With 174 MPH available in 5th on the limiter I think the M12 5th gear is a better bet over a short distance (TR) for a higher top speed. I believe Harry only managed 160's on the Autobahns when his car was stock with all the room in the world. Its still too tall for the power on stock/low powerd modded cars.
All IMO of course....but I have spent a really really long time researching this and developing mine.