Bleeding the brakes
Discussion
Mick,
I use ATE super blue racing fluid in my BMW. As it's blue rather than clear, it doesn't get DOT approval, but exceeds the performance of DOT4 and is fully compatable with DOT4. As it's coloured, you'll know when your fluid is completely changed.
Monkfish had it on special offer, a couple of months ago.
I use ATE super blue racing fluid in my BMW. As it's blue rather than clear, it doesn't get DOT approval, but exceeds the performance of DOT4 and is fully compatable with DOT4. As it's coloured, you'll know when your fluid is completely changed.
Monkfish had it on special offer, a couple of months ago.
Bleeding the brakes by pumping the brake pedal is ok in theory. But as the master cylinder piston and seals travel further in the master cylinder bore than they do during normal operation, it's possible to knacker the seals.
You can also bleed the brakes by sucking the fluid through at the bleed nipples (vacuume system) but I found that air leaks past the loose nipples (!!) and you're never quite sure that all air has been removed from the system.
My preferred method is to use a Gunsons Eezibleed kit:
www.gunson.co.uk/item.aspx?item=1818
Fits on to the master cylinder reservior cap and pushes fluid through the system at low pressure. It's a one man job you don't need anybody to assist.
You can also bleed the brakes by sucking the fluid through at the bleed nipples (vacuume system) but I found that air leaks past the loose nipples (!!) and you're never quite sure that all air has been removed from the system.
My preferred method is to use a Gunsons Eezibleed kit:
www.gunson.co.uk/item.aspx?item=1818
Fits on to the master cylinder reservior cap and pushes fluid through the system at low pressure. It's a one man job you don't need anybody to assist.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


