Double DIN stuck
Author
Discussion

MadMaxHSV

Original Poster:

1,816 posts

229 months

Monday 5th April 2010
quotequote all
Is there a knack to pulling the radio out? Got a set of keys in the holes but the f@*king thing still won't budge. Is it supposed to just slide out?

the_ferret82

25,627 posts

215 months

Monday 5th April 2010
quotequote all
MadMaxHSV said:
Is there a knack to pulling the radio out? Got a set of keys in the holes but the f@*king thing still won't budge. Is it supposed to just slide out?
they do just slide out. have you tried putting the keys in and pushing them to the outside of the radio while pulling hard??

personally i find 4 thin screwdrivers in the holes work just as well.

failing the above take the dash apart and pull it out.

gsd2000

11,515 posts

214 months

Monday 5th April 2010
quotequote all
Suppose to slide out but thebconnectors are built into the back of the cage so your trying to unplug the stereo aswell as remove it from the cage.

Have you tried wiggling it side to side?

ARAF

20,759 posts

254 months

Monday 5th April 2010
quotequote all
Some units have to have the ignition on, or else the side anchors won't release - anti-theft.

behold81

2,931 posts

200 months

Monday 5th April 2010
quotequote all
Coat hanger... Does it every time. Push them Inward and the pins push out. If you can pull on say a tape hole or something that helps. if all else fails. Im not sure if you can do it on these cars but remove the glovebox and push from behind.

MadMaxHSV

Original Poster:

1,816 posts

229 months

Monday 5th April 2010
quotequote all
Thanks guys, managed it in the end was just having a mare.
The keys don't fully disengage the catches looking at when out, so a flat blade screwdriver would have worked better.

Cheers thumbup

Anyway fruits of my labour, ScanGuages now fitted biggrin