VXR8 wortec SC pulleys
VXR8 wortec SC pulleys
Author
Discussion

maverick964_uk

Original Poster:

507 posts

269 months

Saturday 10th April 2010
quotequote all
My VXR8 has the wortec big blower on it. My mate is valeting it as we speed and he noticed that the lower front big pulley wobbles while the engine is running.
Should it do that?

The car recently had a service and Picador changed the front and rear SC belts.

thanks

tiler

693 posts

267 months

Saturday 10th April 2010
quotequote all
Thats not part of the s/c kit that is the oem crank/harmonic pulley wheel

mine came lose and there is a bulitin about it which relates to standard cars so
if you have a charger get it checked soon

I know vrephatoms came off big mess

crisisjez

9,209 posts

236 months

Saturday 10th April 2010
quotequote all
Don´t run the caryikes
Get the car to a Vauxhall dealer to have the Harmonic balancer done up again, if you use the car all the oil will fall out

stevieturbo

18,105 posts

278 months

Saturday 10th April 2010
quotequote all
Just to re-iterate...tow the car, do not run the engine.

Boosted LS1

21,200 posts

291 months

Saturday 10th April 2010
quotequote all
The torque setting on the damper bolt is very high and a new bolt should be fitted everytime you refit the pulley according to the manual. When the pulley comes loose it's usually because the garage didn't follow the correct torque procedure.

If it's not the bolt then the rubber bonding between the outer half and inner half may be perishing.

maverick964_uk

Original Poster:

507 posts

269 months

Saturday 10th April 2010
quotequote all
thanks for all the feedback.
Would you say its down to the dealer after the front belt was changed?

stevieturbo

18,105 posts

278 months

Saturday 10th April 2010
quotequote all
Nope. Changing belts would have nothing to do with how the crank pulley is fitted.


Well..unless they used an incredibly strange fitting procedure lol

maverick964_uk

Original Poster:

507 posts

269 months

Sunday 11th April 2010
quotequote all
can it therefore just come loose over time?
Seems odd after the car just had front and rear belts changed by picador....

Pomona

303 posts

275 months

Sunday 11th April 2010
quotequote all
I am surprised that nobody has drilled and dowelled the crank pulley.That was one of the first items on the list once I supercharged my LS1 GTSR back in 2001.Very simple to do with the Corvette recommended drill jig,special drill and reamer.2 dowelles and the pulley will never spin.You all may say,mines been ok,but when its not,ie one I have seen recently,what a mess up!!!

maverick964_uk

Original Poster:

507 posts

269 months

Tuesday 13th April 2010
quotequote all
anyone out there able to do the work on my car? Crank pulley and starter motor problem??

Pomona

303 posts

275 months

Tuesday 13th April 2010
quotequote all
Nothing to do with belt change.If you have big blower kits fitted and driven from crank pulley via S/C at some stage the pulley can slip.Just use drill jig and dowel as the supercharger package company SHOULD advise.Even Tiler says this and he is a !!!!!! fan.

maverick964_uk

Original Poster:

507 posts

269 months

Wednesday 14th April 2010
quotequote all
thanks