I've gone and done it....
Discussion
I've got a Silverline too. Rotary is fine for anyone with a brain. You quickly get used to it. It would take a silly pad and polish combo and some foolish handling to do damage. So much nicer to use for a large car. The amount of vibration the PC gives is really noticeable once you use the rotary for a while.
can anyone tell me what polishes people use im digging out my heavy silverline model (hope this doesnt make my tennis elbow worse) tomoz and im going to attack my white merc vito with it first get my eye in and all that, also does anyone know where abouts in bmouth /poole the detailing suppliers may be hiding exept of course halfrauds i try and avoid them if pos
nitrosman1 said:
can anyone tell me what polishes people use im digging out my heavy silverline model (hope this doesnt make my tennis elbow worse) tomoz and im going to attack my white merc vito with it first get my eye in and all that, also does anyone know where abouts in bmouth /poole the detailing suppliers may be hiding exept of course halfrauds i try and avoid them if pos
Mate it depends on the condition of your paint work to start with..... as to detailing suppliers I always use online like Chemical guy's or the ultimate finish etc...Meguiars do a decent range as do menz or 3M really one of the best out there at the moment, It is all down to personal preference Autoglym do SRP but that tends to be really dusty and really only contains fillers that mask the swirls or light scratches.
Good luck on a Vito mate
Edited by the hitman001 on Monday 12th April 23:28
nitrosman1 said:
cheers the paint is fairly patchy faded and scratched in certain areas tho im not looking for a mirror finish as it is a workhorse its just that im having it re sighn-written on thursday and want to get it more respectable
Well IMO if you want the finish you require then go for the Auto glym SRP wil do you fine on that jobthe hitman001 said:
nitrosman1 said:
cheers the paint is fairly patchy faded and scratched in certain areas tho im not looking for a mirror finish as it is a workhorse its just that im having it re sighn-written on thursday and want to get it more respectable
Well IMO if you want the finish you require then go for the Auto glym SRP wil do you fine on that job
nitrosman1 said:
the hitman001 said:
nitrosman1 said:
cheers the paint is fairly patchy faded and scratched in certain areas tho im not looking for a mirror finish as it is a workhorse its just that im having it re sighn-written on thursday and want to get it more respectable
Well IMO if you want the finish you require then go for the Auto glym SRP wil do you fine on that jobnitrosman1 said:
my plan of attack is 1. good wash 2. clay with water 3. tape up trims etc 4. auto glym and mop with on a fairly slow speed i was told the trick is to keep it wet not letting the mop head dry out
thanks for answering all my stupid questions btw
Good plan thanks for answering all my stupid questions btw
you must always prime the the pad on the DA or Rotary due to the heat that is produced I always use on of my quick detailing sprays.
What lube are you planing on for the clay bar?
As said do not put 2 much SRP on if you get white fall put dust then you have used to much,
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



Have fun and fill me in when you get a result