R8 Wheels
Author
Discussion

S800VXR

Original Poster:

5,877 posts

231 months

Monday 19th April 2010
quotequote all
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...

monkfish1

12,522 posts

255 months

Monday 19th April 2010
quotequote all
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...


No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.

S800VXR

Original Poster:

5,877 posts

231 months

Monday 19th April 2010
quotequote all
Cheers Rog.

Trailermasher

730 posts

253 months

Monday 19th April 2010
quotequote all
monkfish1 said:
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...
No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.
35-40mm spacer and new studs?
LR Disco style?

ARAF

20,759 posts

254 months

Monday 19th April 2010
quotequote all
Trailermasher said:
monkfish1 said:
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...
No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.
35-40mm spacer and new studs?
LR Disco style?
Offset is the wrong way. You'd need to shave 20mm off the inside of the wheel centre.

Trailermasher

730 posts

253 months

Monday 19th April 2010
quotequote all
ARAF said:
Trailermasher said:
monkfish1 said:
S800VXR said:
Whats the full wheel spec for the 19" R8 wheels as a mate has a set of BBS LM replicas for sale (cheap but brand spankers) which I think may fit the R8's... Think the back ones from his set are 10"x19 with a 22offset..., front being 8.5" with a 35offset...
No chance Roger. Rears are 57mm offset, fronts 48, though 35 will fit.
35-40mm spacer and new studs?
LR Disco style?
Offset is the wrong way. You'd need to shave 20mm off the inside of the wheel centre.
Should be easiy achieved if the centre's thick enough.

S800VXR

Original Poster:

5,877 posts

231 months

Thursday 13th May 2010
quotequote all
Excuse me as the Florida suns getting to me.... however, thinking about this, I currently have 10" with a 45 offset soooooo, surely a 57offset on a 9.5" rim would be the same since Im taking 12.7mm off the width but adding 12mm to the offset so it should compensate...? Remember I have no lip on the rear and the edge is probably pushed out a few mm as well.

I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?

gsd2000

11,515 posts

214 months

Thursday 13th May 2010
quotequote all
I think the centre bore of the r8 wheels needs boring out to fit a ro. But id be intetested if you can get them to work.

Corevette replica wheels may also work

Magic919

14,590 posts

232 months

Thursday 13th May 2010
quotequote all
S800VXR said:
Excuse me as the Florida suns getting to me.... however, thinking about this, I currently have 10" with a 45 offset soooooo, surely a 57offset on a 9.5" rim would be the same since Im taking 12.7mm off the width but adding 12mm to the offset so it should compensate...? Remember I have no lip on the rear and the edge is probably pushed out a few mm as well.

I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
You'd be taking the wheel inboard due to the offset change. Then taking the outer rim in a bit more as the wheel is less wide. So it's about 12mm plus 1/2 of 12.5. But bear in mind you'll be about 5mm closer to the suspension on the inboard side of the rim.

S800VXR

Original Poster:

5,877 posts

231 months

Thursday 13th May 2010
quotequote all
Magic919 said:
S800VXR said:
Excuse me as the Florida suns getting to me.... however, thinking about this, I currently have 10" with a 45 offset soooooo, surely a 57offset on a 9.5" rim would be the same since Im taking 12.7mm off the width but adding 12mm to the offset so it should compensate...? Remember I have no lip on the rear and the edge is probably pushed out a few mm as well.

I assume also that the 20" VXR8 stock whels are 9.5 width on the rear with a 57mm offset?
You'd be taking the wheel inboard due to the offset change. Then taking the outer rim in a bit more as the wheel is less wide. So it's about 12mm plus 1/2 of 12.5. But bear in mind you'll be about 5mm closer to the suspension on the inboard side of the rim.
Told ya the sun was getting to me! 95' outside and to hot to sunbath even.