Rear Brake setups - small!
Rear Brake setups - small!
Author
Discussion

S800VXR

Original Poster:

5,877 posts

231 months

Tuesday 20th April 2010
quotequote all
Whats setups are some of you running which give the smallest possible rear brakes so you can run 15" or so wheels and high profile drag radials...?

the_ferret82

25,627 posts

215 months

Tuesday 20th April 2010
quotequote all
S800VXR said:
Whats setups are some of you running which give the smallest possible rear brakes so you can run 15" or so wheels and high profile drag radials...?
i had a member by my old 04 cv8 disks and calipers off me for such a reason.

Drew ss

2,683 posts

215 months

Tuesday 20th April 2010
quotequote all
i have 15 ich rims i run over my standard brakes on the ss easy enough to come buy

ringram

14,702 posts

279 months

Tuesday 20th April 2010
quotequote all
Global-i will know. He has massive marshmellow tires on his.

after_shock

8,751 posts

251 months

Tuesday 20th April 2010
quotequote all
As above the CV8's have the smallest rear brakes ive seen!

jhinchy

298 posts

230 months

Tuesday 20th April 2010
quotequote all
I have a set of rear brakes here from an 02 SS ute, pretty small, and as drew says, will fit under 15" rims

drew ss

2,683 posts

215 months

Tuesday 20th April 2010
quotequote all
jhinchy said:
I have a set of rear brakes here from an 02 SS ute, pretty small, and as drew says, will fit under 15" rims


did u upgrade john

jhinchy

298 posts

230 months

Tuesday 20th April 2010
quotequote all
Did i not tell you that the other day? thats why i bought the cv8 rims, to clear the calipers. I fitted some AP's, made a massive difference.

drew ss

2,683 posts

215 months

Tuesday 20th April 2010
quotequote all
jhinchy said:
Did i not tell you that the other day? thats why i bought the cv8 rims, to clear the calipers. I fitted some AP's, made a massive difference.


no nice one are the old calipers clean as i wouldnt mind a second set if no one wants them first

Edited by drew ss on Tuesday 20th April 22:10

jhinchy

298 posts

230 months

Tuesday 20th April 2010
quotequote all
one of them was sticking slightly, but may just be the slider. shouldnt be too difficult to sort

global-i

368 posts

247 months

Tuesday 20th April 2010
quotequote all
I have a set of std CV8 rear discs and calipers, these allow me to fit the 15” wheels on.
Even then there is very little clearance between the Banjo bolt on the caliper and the rim. I also have to point the flexi pipe inboard or the point where the metal is pressed onto the rubber flexi rubs on the inside of the Rim.
It takes about 1 hour a side to swap the CV8 discs with the APs and bleed the brakes.

MyM8V8

9,468 posts

226 months

Wednesday 21st April 2010
quotequote all
CV8's for me too Rog. I just leave 'em on.

S800VXR

Original Poster:

5,877 posts

231 months

Wednesday 21st April 2010
quotequote all
Cheers guys, how much for a set of cv8 calipers and disks then in good nick?

gsd2000

11,515 posts

214 months

Wednesday 21st April 2010
quotequote all
S800VXR said:
Cheers guys, how much for a set of cv8 calipers and disks then in good nick?
raving?

S800VXR

Original Poster:

5,877 posts

231 months

Wednesday 21st April 2010
quotequote all
gsd2000 said:
S800VXR said:
Cheers guys, how much for a set of cv8 calipers and disks then in good nick?
raving?
Mayes rates please! wink

gsd2000

11,515 posts

214 months

Wednesday 21st April 2010
quotequote all
S800VXR said:
gsd2000 said:
S800VXR said:
Cheers guys, how much for a set of cv8 calipers and disks then in good nick?
raving?
Mayes rates please! wink
mine are in the garage but i may need them myself wink