ISO connectors on Monaro
ISO connectors on Monaro
Author
Discussion

mfurse

Original Poster:

19 posts

200 months

Thursday 22nd April 2010
quotequote all
Hello everyone, I've been through the FAQ's and the LS1 forum looking at various stereo installs as I'm looking at getting a Pioneer AVH-3200BT ([URL]www.pioneer.co.uk/uk/products/25/109/281/AVH-3200BT/specs.html[/URL]) to replace the standard stereo - don't worry I'm going to get the exhaust done too - I need the stereo to do calls in the car

The question I have is does the car have a standard set of ISO connectors so its literally "plug and play" or do I need an adaptor such as [URL]www.caraudiodirect.co.uk/vauxhall-wiring-adaptor.html[/URL]?

The rear of the Pioneer head unit can be seen here:


I can't seem to work it out from the pictures and various guides!





drew ss

2,683 posts

215 months

Thursday 22nd April 2010
quotequote all
if ur buying the stereo in europe (uk) it should have the plug with it the one that goes into the back of the headset and the other end will have iso plugs like normal..im not too sure about the car side i no mine had the australian plug as i imported it so i got someone to go into auto bahn for me and and get a plug that went from my wiring loom (car side) to a set of iso connectors that will hook into the pioneer loom and wasnt a prob.........im sure someone will no

tattooboy

7,946 posts

209 months

Thursday 22nd April 2010
quotequote all
I have recently fitted a Parrot Kit and I did not need to by any ISO lead converters, the orig harness for the standard radio is 1 block of 3 inputs, 2 x 8 pin and 1 x 10 pin, all I did was unplug this from the radio and plugged the harness that came with the Parrot straight into that then the parrot harness into the radio. The only thing I lost was the steering wheel remote as I now know that this is the 10 pin part of the orig plug which the parrot harness did not use.

I would assume that this radio should fit no problems, the only thing you may need to buy if you wanted it to work would be a loom for the steering wheel controls.

behold81

2,931 posts

200 months

Thursday 22nd April 2010
quotequote all
drew ss said:
if ur buying the stereo in europe (uk) it should have the plug with it the one that goes into the back of the headset and the other end will have iso plugs like normal..im not too sure about the car side i no mine had the australian plug as i imported it so i got someone to go into auto bahn for me and and get a plug that went from my wiring loom (car side) to a set of iso connectors that will hook into the pioneer loom and wasnt a prob.........im sure someone will no


I agree. There will be a connector that goes in the lower middle (In Black) on the radio to an ISO connector. There is a chance you will need an adapter harness. You could make one out of the old radio connector if it is not ISO. (But then ther radio will be no use)

drew ss

2,683 posts

215 months

Thursday 22nd April 2010
quotequote all
behold81 said:
drew ss said:
if ur buying the stereo in europe (uk) it should have the plug with it the one that goes into the back of the headset and the other end will have iso plugs like normal..im not too sure about the car side i no mine had the australian plug as i imported it so i got someone to go into auto bahn for me and and get a plug that went from my wiring loom (car side) to a set of iso connectors that will hook into the pioneer loom and wasnt a prob.........im sure someone will no


I agree. There will be a connector that goes in the lower middle (In Black) on the radio to an ISO connector. There is a chance you will need an adapter harness. You could make one out of the old radio connector if it is not ISO. (But then ther radio will be no use)


i have a female plug here somewhere that i cut of the adaptor i got from aus if u need it as i put the el stando back in

mfurse

Original Poster:

19 posts

200 months

Thursday 22nd April 2010
quotequote all
Thanks guys - ordering one now We'll soon see!