I want to be louder!!
I want to be louder!!
Author
Discussion

llcoolbc

Original Poster:

339 posts

209 months

Friday 23rd April 2010
quotequote all
I'm sick of hearing about everyone else's ear shattering exhausts on this forum and want a piece of the action!
My Ro VXR has a Vortex Cat Back which the previous owner put on, but just doesn't seem growling enough for me.
What do I need to do?
I'm not technical in any way, so do I need headers and a remap? What would this cost?
Monkfish would be my first choice as I trust them completely with my baby
Help!

tattooboy

7,946 posts

209 months

Friday 23rd April 2010
quotequote all
Easiest and cheapest way would be to go to your local custom exhaust maker and have them remove any silencers you have, I'm running straight thro 2.5 inch from the cat's, and it's loud

gsd2000

11,515 posts

214 months

Friday 23rd April 2010
quotequote all
If its a wortec, try Converting it to a loud setup, i think you change the blanking plates on the later catbacks. Give monkfish a call

llcoolbc

Original Poster:

339 posts

209 months

Friday 23rd April 2010
quotequote all
gsd2000 said:
If its a wortec, try Converting it to a loud setup, i think you change the blanking plates on the later catbacks. Give monkfish a call


It's a Vortex catback (which I've never heard of!)
www.vortex-performance-exhausts.co.uk/

Is it as simple as just removing the silencers?

stigmundfreud

22,454 posts

241 months

Friday 23rd April 2010
quotequote all
llcoolbc said:
gsd2000 said:
If its a wortec, try Converting it to a loud setup, i think you change the blanking plates on the later catbacks. Give monkfish a call
It's a Vortex catback (which I've never heard of!)
http://www.vortex-performance-exhausts.co.uk/

Is it as simple as just removing the silencers?
remove silences = increase noise + drone = negatory experience. Get a wortec = job done

llcoolbc

Original Poster:

339 posts

209 months

Friday 23rd April 2010
quotequote all
Thanks Stig, would I have to buy a new cat back or just the headers? Would it need remapped?

the_ferret82

25,627 posts

215 months

Friday 23rd April 2010
quotequote all
llcoolbc said:
Thanks Stig, would I have to buy a new cat back or just the headers? Would it need remapped?
remap for sure if you get headers. and i would have it remapped for a new cat-back as well.

llcoolbc

Original Poster:

339 posts

209 months

Friday 23rd April 2010
quotequote all
Thanks Ferret, anyone any idea what this might cost?

gsd2000

11,515 posts

214 months

Friday 23rd April 2010
quotequote all
Sorry i thought it was wortec, you could get a wortec catback and sell your current one

the_ferret82

25,627 posts

215 months

Friday 23rd April 2010
quotequote all
llcoolbc said:
Thanks Ferret, anyone any idea what this might cost?
a few pennies i would suggest looking at the monkfish website all the prices are there. not cheep really but just had mine done there well worth it.

snowwolf

11,503 posts

206 months

Friday 23rd April 2010
quotequote all
Mine is standard, but with rear boxes removed and a couple of straight through leaf blowers fitted biggrin

007 VXR

64,187 posts

218 months

Friday 23rd April 2010
quotequote all
wortec no cheap .. but great fun biggrinbiggrinbiggrinbiggrin

talk to the fish smile

djwilk

1,693 posts

200 months

Friday 23rd April 2010
quotequote all
llcoolbc,
You can get a custom made jobby in 2.5" at MIJ Performance. Mine worked out £550 plus £150 for decat. I absolutely love it. Would let you hear it, but... oh well, you know...

monaro5.7

7,337 posts

210 months

Friday 23rd April 2010
quotequote all
picking mine up just now with custom made headers £700 high flow cats £500 and they have also cut the middle boxes out my Wortec system lol

llcoolbc

Original Poster:

339 posts

209 months

Friday 23rd April 2010
quotequote all
I'll speak to MIJ to get a price for what I need. Where did you get yours done Monaro5.7?

the_ferret82

25,627 posts

215 months

Friday 23rd April 2010
quotequote all
llcoolbc

just spotted you based in london. where about's as i am just north of london so if you are interested in seeing / hearing others drop me a note. i have a 5.7 04 CV* but it should give you an idea.

tattooboy

7,946 posts

209 months

Friday 23rd April 2010
quotequote all
stigmundfreud said:
llcoolbc said:
gsd2000 said:
If its a wortec, try Converting it to a loud setup, i think you change the blanking plates on the later catbacks. Give monkfish a call


It's a Vortex catback (which I've never heard of!)
www.vortex-performance-exhausts.co.uk/

Is it as simple as just removing the silencers?


remove silences = increase noise + drone = negatory experience. Get a wortec = job done


Would have to dis-agree with you on this one Stig, I get less drone now inside the car running no silencers than I did just running the rear, yes admittedly it's louder in the car under heavy acceleration but once you get into 5th and 6th gear or under normal civil acceleration, there is nearly no drone what so ever.

I can never get my head around people wanting to spend thousands on Wortec Exhausts or other makes and Headers and a remap (due to exhaust change??)just to get a V8 noise, IMO it's a waste of money.

IMO the best thing to do is wait for a meet, different people will have different set ups and then you can make your own mind up, is it a £3K Woretc spend (estimate £1,200 exhaust, same on headers or more plus a £500 remap?) a £700 custom exhaust spend or a cheapy remove some silencers spend !!

ARAF

20,759 posts

254 months

Friday 23rd April 2010
quotequote all
tattooboy said:
stigmundfreud said:
llcoolbc said:
gsd2000 said:
If its a wortec, try Converting it to a loud setup, i think you change the blanking plates on the later catbacks. Give monkfish a call
It's a Vortex catback (which I've never heard of!)
http://www.vortex-performance-exhausts.co.uk/

Is it as simple as just removing the silencers?
remove silences = increase noise + drone = negatory experience. Get a wortec = job done
Would have to dis-agree with you on this one Stig, I get less drone now inside the car running no silencers than I did just running the rear, yes admittedly it's louder in the car under heavy acceleration but once you get into 5th and 6th gear or under normal civil acceleration, there is nearly no drone what so ever.

I can never get my head around people wanting to spend thousands on Wortec Exhausts or other makes and Headers and a remap (due to exhaust change??)just to get a V8 noise, IMO it's a waste of money.

IMO the best thing to do is wait for a meet, different people will have different set ups and then you can make your own mind up, is it a £3K Woretc spend (estimate £1,200 exhaust, same on headers or more plus a £500 remap?) a £700 custom exhaust spend or a cheapy remove some silencers spend !!
From having you tear up the slip road on the inside of the A12 to Woodbridge, I can say that from the outside your exhaust is money well spent. thumbup

tattooboy

7,946 posts

209 months

Friday 23rd April 2010
quotequote all
ARAF said:
tattooboy said:
stigmundfreud said:
llcoolbc said:
gsd2000 said:
If its a wortec, try Converting it to a loud setup, i think you change the blanking plates on the later catbacks. Give monkfish a call


It's a Vortex catback (which I've never heard of!)
www.vortex-performance-exhausts.co.uk/

Is it as simple as just removing the silencers?


remove silences = increase noise + drone = negatory experience. Get a wortec = job done


Would have to dis-agree with you on this one Stig, I get less drone now inside the car running no silencers than I did just running the rear, yes admittedly it's louder in the car under heavy acceleration but once you get into 5th and 6th gear or under normal civil acceleration, there is nearly no drone what so ever.

I can never get my head around people wanting to spend thousands on Wortec Exhausts or other makes and Headers and a remap (due to exhaust change??)just to get a V8 noise, IMO it's a waste of money.

IMO the best thing to do is wait for a meet, different people will have different set ups and then you can make your own mind up, is it a £3K Woretc spend (estimate £1,200 exhaust, same on headers or more plus a £500 remap?) a £700 custom exhaust spend or a cheapy remove some silencers spend !!


From having you tear up the slip road on the inside of the A12 to Woodbridge, I can say that from the outside your exhaust is money well spent. thumbup


Cheers ARAF thumbup or in my case, being a tight arse, not a lot of money well spent rofl

llcoolbc

Original Poster:

339 posts

209 months

Friday 23rd April 2010
quotequote all
the_ferret82 said:
llcoolbc

just spotted you based in london. where about's as i am just north of london so if you are interested in seeing / hearing others drop me a note. i have a 5.7 04 CV* but it should give you an idea.


Hi Ferret, I'm based in Richmond, so not a million miles away!
When's the next South East England meet so I can see all the different set ups and judge for myself?
It seems everyone has a different opinion (which is good), but unsure which is right for me. Would rather not spend a fortune obviously, but do really want that NASCAR grumbling growl to frighten the scores of AM Vantages that slowly meander around this part of the world!