Stone chips
Author
Discussion

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 26th April 2010
quotequote all
Was cleaning the car over the weekend and found a stone chip right on the corner of the bonnet and was wondering if anyone has use any of the various chips away companies that are out there.

Wanna know what there results are like?

i have put up a pic of the chip to see if u think its repairable.


gsd2000

11,515 posts

214 months

Monday 26th April 2010
quotequote all
You could touch it up, but the chip looks rusty so i used some bilt hamber deox c gel, and that removes rust. Then touch the chip up with an artist brush onto the clean rust free metal.

SimonV8ster

13,039 posts

259 months

Monday 26th April 2010
quotequote all
I've used a local one to me - did a very good job on the corner of a bumper that I thought would be very difficult to do.

Don't think they like to do anything above bumper height though ? Would have thought that they could do that OK as its small and not in an obvious place.

One thing I have found useful is those fibreglass pens you can buy for scrapping out crap on wheels. It would be ideal to get most of that off before treating it with something.

eztiger

836 posts

211 months

Monday 26th April 2010
quotequote all
I was thinking about looking at the Dr Colorchips stuff for touching my bumper and a few bits and bobs elsewhere (maybe even the flaky handles..?)

I've only heard good things but it looks pricey from the states and I don't know if our paint codes match the GTO codes.

Might be worth a look... www.drcolorchip.com/

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 26th April 2010
quotequote all
eztiger said:
I was thinking about looking at the Dr Colorchips stuff for touching my bumper and a few bits and bobs elsewhere (maybe even the flaky handles..?)

I've only heard good things but it looks pricey from the states and I don't know if our paint codes match the GTO codes.

Might be worth a look... www.drcolorchip.com/


My work make paint up so getting paint no a problem and codes do match.

Chipsaway have been recommended to me

sloooooow

52 posts

281 months

Tuesday 27th April 2010
quotequote all
This stuff is good, much the same as drchips I expect, except you can buy it from Frosts in the UK.

www.frost.co.uk/item_detail.asp?productID=9544

The manufacturer, Langka, has a site here with videos etc www.langka.com.

They don't supply the paint, it's just normal touch-up, so no problems with matching.

The whole process works on the fact that touch up paint and original paint are not the same thing.

Moanro5.7

Original Poster:

7,337 posts

210 months

Tuesday 27th April 2010
quotequote all
Phoned a few places to day and both said the bonnet needs painted due 2 it being silver

ARAF

20,759 posts

254 months

Tuesday 27th April 2010
quotequote all
Moanro5.7 said:
Phoned a few places to day and both said the bonnet needs painted due 2 it being silver frown
Our old BMW (Lachs Silver) had the chipsaway treatment, and it was faultless. I can't see why your local ones can't do the same.

Moanro5.7

Original Poster:

7,337 posts

210 months

Tuesday 27th April 2010
quotequote all
ARAF said:
Moanro5.7 said:
Phoned a few places to day and both said the bonnet needs painted due 2 it being silver


Our old BMW (Lachs Silver) had the chipsaway treatment, and it was faultless. I can't see why your local ones can't do the same.


he did not know the car so he went away and looked at it on the web and came back saying the is not a crease line in the bonnet that he could use to blend it in. Phoned a second guy and he confimed the same as the first.

Checked with the paint department and they do a gel that will treat the rust and mix me up 1/4lrt of paint and have a mate with a compressor so might invest in an air brush set and give it a go if anything will seal off the rust hopefully

gsd2000

11,515 posts

214 months

Tuesday 27th April 2010
quotequote all
Moanro5.7 said:
ARAF said:
Moanro5.7 said:
Phoned a few places to day and both said the bonnet needs painted due 2 it being silver frown
Our old BMW (Lachs Silver) had the chipsaway treatment, and it was faultless. I can't see why your local ones can't do the same.
he did not know the car so he went away and looked at it on the web and came back saying the is not a crease line in the bonnet that he could use to blend it in. Phoned a second guy and he confimed the same as the first.

Checked with the paint department and they do a gel that will treat the rust and mix me up 1/4lrt of paint and have a mate with a compressor so might invest in an air brush set and give it a go if anything will seal off the rust hopefully smile
the gel sounds like the stuff i used smile Hope you get it sorted

SGA04

65 posts

201 months

Tuesday 27th April 2010
quotequote all
Looks like full respray mate !!!
(get black - best colour obviously)

Failing that, I've heard chipsaway are good though never used them. Also, is there not a wee place at Bilston Glen that does small repairs.