Discussion
Hey guys, Ive had a quick search guys and couldn't find anyone who's discussed this before...
Are your rubber air intake 'inserts' which go into the nostrils and direct air...facing backward? It's like the 4 scoops the rubber bits have on them are facing away from the nostril grill, is this intentional? It looks like the air would really struggle to flow into them!
Are your rubber air intake 'inserts' which go into the nostrils and direct air...facing backward? It's like the 4 scoops the rubber bits have on them are facing away from the nostril grill, is this intentional? It looks like the air would really struggle to flow into them!
Edited by mfurse on Monday 26th April 23:34
crisisjez said:
The nostrils are designed to let air out not in.
At speed any airflow through them will reduce airflow through the rad and coolers.
At speed any airflow through them will reduce airflow through the rad and coolers.
really ive been running mine without i was under the imression thay tend to restrict airflow all together and the reason theyre so restrictive is because in heavy rain thay stop water getting on the top of the engine
They are sited way too far back to do anything other than reduce the pressure differential under the bonnet.
ie reduce the flow of air across the rad as some air in the engine bay will be rammed in via the nostrils....which is bad.
Remember all the air will be extracted from underneath the car (generally) so you are looking for the highest proportion of that air to be routed via the rad and coolers.
I put my nostril rubbers back and have had no cooling problems at all. (When moving)
ie reduce the flow of air across the rad as some air in the engine bay will be rammed in via the nostrils....which is bad.
Remember all the air will be extracted from underneath the car (generally) so you are looking for the highest proportion of that air to be routed via the rad and coolers.
I put my nostril rubbers back and have had no cooling problems at all. (When moving)
Edited by crisisjez on Tuesday 27th April 22:16
crisisjez said:
snowwolf said:
Do these cars have a tendency to overheat then?
Not really, but they do have a lot of heat to get rid of. If you drive round till your car is nicely warm then put it in a single garage for 15 mins then open the door you'll see what I mean

crisisjez said:
snowwolf said:
Do these cars have a tendency to overheat then?
Not really, but they do have a lot of heat to get rid of. If you drive round till your car is nicely warm then put it in a single garage for 15 mins then open the door you'll see what I mean

Keeps the garage nice and damp-free! 
Mine are clear and along with the vented bonnet my cooling fans hardly ever come on. As for their use, I feel they add to the general cooling under the bonnet. I see what you are saying Jezz but I dont think flow through these will effect air flow through the rad at all, to many gaps around the engine and to much space and distance between the two areas to make that conclusion.
S800VXR said:
Mine are clear and along with the vented bonnet my cooling fans hardly ever come on. As for their use, I feel they add to the general cooling under the bonnet. I see what you are saying Jezz but I dont think flow through these will effect air flow through the rad at all, to many gaps around the engine and to much space and distance between the two areas to make that conclusion.
It will stall air flow at speed, quite what speed im not sure, because it will create high pressure in the engine bay. Clearly in your case probably less of a problem because of the vents you have as well. So say Holden anyway

S800VXR said:
Mine are clear and along with the vented bonnet my cooling fans hardly ever come on. As for their use, I feel they add to the general cooling under the bonnet. I see what you are saying Jezz but I dont think flow through these will effect air flow through the rad at all, to many gaps around the engine and to much space and distance between the two areas to make that conclusion.
Your louvres are in the neg pressure part of the bonnet and are actually improving the underbonnet efficiency, allowing more airflow through the engine bay.
At speed you'll probably find that the ram air from the nostrils is going straight out the louvres
Block your nostrils and the partial pressure under the bonnet wil drop and air will be drawn through the front of the car (mainly through the rad and coolers because thats what its designed to do) and exit both upward and downward (due to your louvres) from the engine bay. As hot air rises you will find the louvres will be most efficient, also the pressure differential undercar to engine bay will be less so the air will be more attracted to go out the bonnet anyway
Edited by crisisjez on Wednesday 28th April 12:34
crisisjez said:
S800VXR said:
Mine are clear and along with the vented bonnet my cooling fans hardly ever come on. As for their use, I feel they add to the general cooling under the bonnet. I see what you are saying Jezz but I dont think flow through these will effect air flow through the rad at all, to many gaps around the engine and to much space and distance between the two areas to make that conclusion.
Your louvres are in the neg pressure part of the bonnet and are actually improving the underbonnet efficiency, allowing more airflow through the engine bay.At speed you'll probably find that the ram air from the nostrils is going straight out the louvres

Block your nostrils and the partial pressure under the bonnet wil drop and air will be drawn through the front of the car (mainly through the rad and coolers because thats what its designed to do) and exit both upward and downward (due to your louvres) from the engine bay. As hot air rises you will find the louvres will be most efficient, also the pressure differential undercar to engine bay will be less so the air will be more attracted to go out the bonnet anyway

Edited by crisisjez on Wednesday 28th April 12:34

I didn't want my engine covered in road crap after the fire blanket was removed so mine are completely blanked off. I cannot say I've noticed and difference.
Also, "ram air" (on bikes anyway) is where air is directed into a pressurised, sealed airbox giving an FI effect. Cannot see that happening here.
Also, "ram air" (on bikes anyway) is where air is directed into a pressurised, sealed airbox giving an FI effect. Cannot see that happening here.
Edited by anonymous-user on Wednesday 28th April 13:23
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


