Stupid question time
Stupid question time
Author
Discussion

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 2nd May 2010
quotequote all
How do you remove the sideskirts from a ro?

I have removed the 2 screws either side and the 4 or so screws underneath the skirt. I have noticed that there are 4 or so plastic screws on the inside of the doors under a rubber strip.

The problem is that these screws under the rubber strip just spin and dont actually come out, is there a trick to these?

SimonV8ster

13,039 posts

259 months

Sunday 2nd May 2010
quotequote all
Not a trick but I just got some pliers on them and pulled them out !!

They're stupid as they have a screw type head but don't revolve anticlockwise as you say !!

Maybe they are once only fitting ??

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 2nd May 2010
quotequote all
SimonV8ster said:
Not a trick but I just got some pliers on them and pulled them out !!

They're stupid as they have a screw type head but don't revolve anticlockwise as you say !!

Maybe they are once only fitting ??
they spin freely but dont actually come out, i will try the pliers trick and then order some more from the fish unless any one else has any ideas.

H15 UTE

76 posts

208 months

Sunday 2nd May 2010
quotequote all
Hi gsd, they're scrivets put some upward pressure on panel or scrivet base whilst unscrewing, failing that a good yank will do it!

Edited by H15 UTE on Sunday 2nd May 18:49

SimonV8ster

13,039 posts

259 months

Sunday 2nd May 2010
quotequote all
Yeah, meant to say they don't 'unwind and come out' they just turn !!

Or try and get something else underneath it as it turns.

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 2nd May 2010
quotequote all
H15 UTE said:
Hi gsd, they're scrivets put some upward pressure on panel or scrivet base whilst unscrewing, failing that a good yank will do it!

Edited by H15 UTE on Sunday 2nd May 18:49
ah ok, thanks for the advice i will try that

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 2nd May 2010
quotequote all
SimonV8ster said:
Yeah, meant to say they don't 'unwind and come out' they just turn !!

Or try and get something else underneath it as it turns.
thanks for the help smile

Bonnie and Clyde

11,701 posts

223 months

Sunday 2nd May 2010
quotequote all
Why are you taking them off???

mfp4073

2,111 posts

205 months

Sunday 2nd May 2010
quotequote all
Once the screws are out the sideskirt has to slide forward as there are a few clips hidden towards the rear of the car. Don't just pull the sideskirt off away from the car or you will break something.
I took mine off to clean out all the muck and rustproof the inner panel.

gsd2000

Original Poster:

11,515 posts

214 months

Sunday 2nd May 2010
quotequote all
Bonnie and Clyde said:
Why are you taking them off???
to clean and rustproof

Bonnie and Clyde

11,701 posts

223 months

Sunday 2nd May 2010
quotequote all
gsd2000 said:
Bonnie and Clyde said:
Why are you taking them off???


to clean and rustproof
Oh ok

granada203028

1,500 posts

228 months

Sunday 2nd May 2010
quotequote all
I found the top fixing could be left in place and the skirt hinges on them adequately to get access for cleaning inspection etc.