Cylinder heads
Author
Discussion

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
There is probbably a million topics on this but here is another 1.

Yesterday i got 2 cylinder heads from a kind member off the forum, But after a little research i have found out there is 2 types of heads for a LS1. I have found u get 241 & 243 casting numbers.

After a little look about various forum the 243 heads have better flowing throw then and putting stock 243 heads on is worth about 20-30 rwhp.

My question is that iam having the heads ported and gas flowed. So am i wasting my time to have the 241 heads done and start looking for a set of 243 heads? or will the 241 heads be fine after they are flowed?

I have a cam and valve spring already was was also thinking about putting new valves into the heads, Can u get a big valves for the heads aswell?



What iam looking to get as close as i can to 400rwhp with the mods.

Thanks for ur feedback and if u do comment try keep it simple iam not that bright laugh




anonymous-user

85 months

Monday 3rd May 2010
quotequote all
243 castings were used on LS6 and LS2s and work great when ported. Look in the corner at front of the head and you will see clearly what you have.

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
wormus said:
243 castings were used on LS6 and LS2s and work great when ported. Look in the corner at front of the head and you will see clearly what you have.


I have already checked and it says 241 in the corner.

MyM8V8

9,468 posts

226 months

Monday 3rd May 2010
quotequote all
Me personally, I wouldn't bother with the 241's unless you can get them done for free by a mate or whatever. GM sell LS2 heads quite cheap including some cnc units, if that's the way you want to go.

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
MyM8V8 said:
Me personally, I wouldn't bother with the 241's unless you can get them done for free by a mate or whatever. GM sell LS2 heads quite cheap including some cnc units, if that's the way you want to go.


Well funny u should mention it i can get them done cheep. I work for a motor factors and have a machine shop who do our heads for skimming and pressure testing and they will do them as a project for me

MyM8V8

9,468 posts

226 months

Monday 3rd May 2010
quotequote all
Moanro5.7 said:
MyM8V8 said:
Me personally, I wouldn't bother with the 241's unless you can get them done for free by a mate or whatever. GM sell LS2 heads quite cheap including some cnc units, if that's the way you want to go.
Well funny u should mention it i can get them done cheep. I work for a motor factors and have a machine shop who do our heads for skimming and pressure testing and they will do them as a project for me smile
Brilliant. Let us know how it all pans out. Whats the cam spec?

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
MyM8V8 said:
Moanro5.7 said:
MyM8V8 said:
Me personally, I wouldn't bother with the 241's unless you can get them done for free by a mate or whatever. GM sell LS2 heads quite cheap including some cnc units, if that's the way you want to go.


Well funny u should mention it i can get them done cheep. I work for a motor factors and have a machine shop who do our heads for skimming and pressure testing and they will do them as a project for me


Brilliant. Let us know how it all pans out. Whats the cam spec?


They were closed today so will phone the machine shop 2morrow see what they say and drop them off.

The cam is a 223/231 cam

Magic919

14,590 posts

232 months

Monday 3rd May 2010
quotequote all
MyM8V8 said:
Brilliant. Let us know how it all pans out. Whats the cam spec?
223/231 112.

MyM8V8

9,468 posts

226 months

Monday 3rd May 2010
quotequote all
Moanro5.7 said:
MyM8V8 said:
Moanro5.7 said:
MyM8V8 said:
Me personally, I wouldn't bother with the 241's unless you can get them done for free by a mate or whatever. GM sell LS2 heads quite cheap including some cnc units, if that's the way you want to go.
Well funny u should mention it i can get them done cheep. I work for a motor factors and have a machine shop who do our heads for skimming and pressure testing and they will do them as a project for me smile
Brilliant. Let us know how it all pans out. Whats the cam spec?
They were closed today so will phone the machine shop 2morrow see what they say and drop them off.

The cam is a 223/231 cam smile
You'll like that. That sounds like the LSR with the higher lift that I would have rather had than my 224/232, if it had been around at the time.

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
MyM8V8 said:
Moanro5.7 said:
MyM8V8 said:
Moanro5.7 said:
MyM8V8 said:
Me personally, I wouldn't bother with the 241's unless you can get them done for free by a mate or whatever. GM sell LS2 heads quite cheap including some cnc units, if that's the way you want to go.


Well funny u should mention it i can get them done cheep. I work for a motor factors and have a machine shop who do our heads for skimming and pressure testing and they will do them as a project for me


Brilliant. Let us know how it all pans out. Whats the cam spec?


They were closed today so will phone the machine shop 2morrow see what they say and drop them off.

The cam is a 223/231 cam


You'll like that. That sounds like the LSR with the higher lift that I would have rather had than my 224/232, if it had been around at the time.


Well atleast got the cam right laugh

Magic919

14,590 posts

232 months

Monday 3rd May 2010
quotequote all
LSR. You got it in one Gareth - http://www.summitracing.com/parts/CCA-54-457-11/

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
Magic919 said:
LSR. You got it in one Gareth - www.summitracing.com/parts/CCA-54-457-11/


Looks like a good cam i got then. Gor rigram to thank for the cam thumbup

stevieturbo

18,105 posts

278 months

Monday 3rd May 2010
quotequote all
Skimming and pressure testing is not porting. One anyone can do, the other requires special tools and skill.

Ive a pair of ported 853's here, 1 piece valves, dual springs etc...all ready to go. Only used for a few months.

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
stevieturbo said:
Skimming and pressure testing is not porting. One anyone can do, the other requires special tools and skill.

Ive a pair of ported 853's here, 1 piece valves, dual springs etc...all ready to go. Only used for a few months.


Sounds good mate but ur no gonna give me them on tick till i got the cash laugh

after_shock

8,751 posts

251 months

Monday 3rd May 2010
quotequote all
I do like the look of those LSR cams, half tempted to change myself!

Are LS3 heads the rectangular port style?

MyM8V8

9,468 posts

226 months

Monday 3rd May 2010
quotequote all
after_shock said:
I do like the look of those LSR cams, half tempted to change myself!

Are LS3 heads the rectangular port style?
Yep.

I wouldn't worry about that though, you want the right cam for the right job, only an expert can help you with that. I'd think there are, what Comp call LS3 cams, that would be ok with a cathedral port head, providing the overall combination was right.

I would never choose a cam for myself without the opinion of an expert engine builder first. For example, for your particular application you might want some advance ground in, and what lobe design is best for the way the valves need to work. There are different considerations for NA and FI as well.

Cam selection is a bloody minefield really, and best left alone by us mere mortals who are only able to generalise with our basic understanding.

One thing is for sure, it's not worth putting a good cam into a motor with poor heads. A good set of heads has to be the better place to start.





Edited by MyM8V8 on Monday 3rd May 19:50

after_shock

8,751 posts

251 months

Monday 3rd May 2010
quotequote all
Im sure I was reading that the rectangular style are much better suited to FI?

Also im sure I read that the LS3's dont bolt directly onto the LS2 blocks?

MyM8V8

9,468 posts

226 months

Monday 3rd May 2010
quotequote all
after_shock said:
Im sure I was reading that the rectangular style are much better suited to FI?

Also im sure I read that the LS3's dont bolt directly onto the LS2 blocks?
They do, its the inlet manifold thats' the problem.

You can't use LS3's on LS1's.

Moanro5.7

Original Poster:

7,337 posts

210 months

Monday 3rd May 2010
quotequote all
MyM8V8 said:
after_shock said:
Im sure I was reading that the rectangular style are much better suited to FI?

Also im sure I read that the LS3's dont bolt directly onto the LS2 blocks?


They do, its the inlet manifold thats' the problem.

You can't use LS3's on LS1's.


So After_Shock has L"2 heads which i really want and he wants LS3 heads?

Trailermasher

730 posts

253 months

Monday 3rd May 2010
quotequote all
MyM8V8 said:
after_shock said:
Im sure I was reading that the rectangular style are much better suited to FI?

Also im sure I read that the LS3's dont bolt directly onto the LS2 blocks?
They do, its the inlet manifold thats' the problem.

You can't use LS3's on LS1's.
Why not?

What stops a LS3 manifold going on LS3 heads on a LS1 block?

Does the valley cover have to be changed?