AFR 235 heads
Author
Discussion

anonymous-user

Original Poster:

85 months

Sunday 16th May 2010
quotequote all
I'm thinking of upgrading for my FI 402 iron block. If you want some GMPP CNC ported 243 heads please PM me. These work bloody well up to about 700whp (800+ fwhp) with FI. Roger?

Edited by anonymous-user on Sunday 16th May 19:50

S800VXR

5,877 posts

231 months

Sunday 16th May 2010
quotequote all
Will these fit my block and 122? If so how much?

S800VXR

5,877 posts

231 months

Sunday 16th May 2010
quotequote all
Oh and first dibs if they do...

ringram

14,702 posts

279 months

Sunday 16th May 2010
quotequote all
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.

anonymous-user

Original Poster:

85 months

Sunday 16th May 2010
quotequote all
yes mate, they are LS2 heads and will work brill with your 122. The TVS needs feeding and I suspect the exhaust side of my setup is holding me back. You have first dibs. I'll speak to Mark to see what they are worth.

S800VXR

5,877 posts

231 months

Sunday 16th May 2010
quotequote all
ringram said:
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
Cheeky fker! smile yours is still broke and that NA!! redcard

If the price is right I might get them and store them for future work...?

S800VXR

5,877 posts

231 months

Sunday 16th May 2010
quotequote all
wormus said:
yes mate, they are LS2 heads and will work brill with your 122. The TVS needs feeding and I suspect the exhaust side of my setup is holding me back. You have first dibs. I'll speak to Mark to see what they are worth.
Im also speaking to him tomorrow as mine should have been built and ready by now, he did promise way before my holiday..... If its not IL be expecting him to supply and fit them for free TBH! wink

ringram

14,702 posts

279 months

Sunday 16th May 2010
quotequote all
Yeah Im going to have to get a second V8 for such events! Cant be driving around in this disgusting fiesta for much longer!

S800VXR

5,877 posts

231 months

Sunday 16th May 2010
quotequote all
ringram said:
Yeah Im going to have to get a second V8 for such events! Cant be driving around in this disgusting fiesta for much longer!
Im suprised you fit being such a lanky Bar Steward! wink

anonymous-user

Original Poster:

85 months

Sunday 16th May 2010
quotequote all
ringram said:
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
Torque breaks stuff and I have 950lbs but it tails off as rpm rises. I need to speak to Mark but I suspect flow is holding me back.

ringram

14,702 posts

279 months

Sunday 16th May 2010
quotequote all
Nah mate, its the way the blower works. To get the top end you need a centri. You might get a bit more with heads, but I think your blower is resticting your top end. Stevie Im sure will have more details. But check out the efficiency map for each type.

stevieturbo

18,106 posts

278 months

Sunday 16th May 2010
quotequote all
wormus said:
ringram said:
Yeah they will fit mate.
Poor Wormus, looks like he is trying to blow his as yet incomplete iron block up.
I dont know how much more power you will get. I wouldnt have thought your current heads were holding you back that much.
Sure you will get some more power, but it sounds more to me that you want less power, not more, then your car might be on the road for longer before busting.
Torque breaks stuff and I have 950lbs but it tails off as rpm rises. I need to speak to Mark but I suspect flow is holding me back.
Why not concentrate on building something that you might actually be able to drive for more than a day or two without breaking things, instead of dreaming about silly pub HP numbers....and pub lbft numbers ?

You claim you have 950lbft....aside from a number, what does that actually allow you to do with the car ? Have you managed any race events ? a track day ? a dyno queen day ? Even some reliable road miles ?

And regardless how efficient you think the blower is, yes torque will rise, then fall. Same as any engine, any blower. Just the PD style torque will tend to peak much earlier than other designs. And likely camshaft is also a limiting factor too. It will probably have more impact than heads....but then of course emissions will become an issue.

It's highly unlikely heads are going to have any massive impact on power/torque as that is largely governed by the blower itself, apart from on your wallet. Especially with the crap exchange rate at the minute.


anonymous-user

Original Poster:

85 months

Sunday 16th May 2010
quotequote all
ringram said:
Nah mate, its the way the blower works. To get the top end you need a centri. You might get a bit more with heads, but I think your blower is resticting your top end. Stevie Im sure will have more details. But check out the efficiency map for each type.
I know what you are saying but between 12 and 15psi torque rose by 170lbs between 2500 rpm and 5000rpm but tails off towards 6500rpm. Boost is a flat 15psi right up to 7000rpm so I can only guess the exhaust is holding things back.

crisisjez

9,209 posts

236 months

Sunday 16th May 2010
quotequote all
wormus said:
ringram said:
Nah mate, its the way the blower works. To get the top end you need a centri. You might get a bit more with heads, but I think your blower is resticting your top end. Stevie Im sure will have more details. But check out the efficiency map for each type.
I know what you are saying but between 12 and 15psi torque rose by 170lbs between 2500 rpm and 5000rpm but tails off towards 6500rpm. Boost is a flat 15psi right up to 7000rpm so I can only guess the exhaust is holding things back.


No its your emissions friendly cam. If it was the exhaust you'll show capped HP.

Edited by crisisjez on Sunday 16th May 21:23

stevieturbo

18,106 posts

278 months

Sunday 16th May 2010
quotequote all
wormus said:
ringram said:
Nah mate, its the way the blower works. To get the top end you need a centri. You might get a bit more with heads, but I think your blower is resticting your top end. Stevie Im sure will have more details. But check out the efficiency map for each type.
I know what you are saying but between 12 and 15psi torque rose by 170lbs between 2500 rpm and 5000rpm but tails off towards 6500rpm. Boost is a flat 15psi right up to 7000rpm so I can only guess the exhaust is holding things back.
It's unlikely the exhaust is doing it.

When I ran at FT ages ago....I did 198 in 7/8th mile with some 16psi measured at the collector in my exhaust.
Little did I realise at the time, that the 2 spiral flows I had in the centre had totally collapsed, and there was barely 2" of an opening available for gasses to get through.

It will be your blower, and camshaft. And taling off as you describe is totally normal unless you are building a rev monster.

anonymous-user

Original Poster:

85 months

Monday 17th May 2010
quotequote all
Cheers Stevie for the advice. I just want the car back on the road and don't want to spend loads more money. The engine goes back in this week so I thought I'd ask the question to save on labour.

Edited by anonymous-user on Monday 17th May 08:26

ringram

14,702 posts

279 months

Monday 17th May 2010
quotequote all
In summary. Dont buy the heads mate. Swap the cam for more power than the head swap would give..

anonymous-user

Original Poster:

85 months

Monday 17th May 2010
quotequote all
ringram said:
In summary. Dont buy the heads mate. Swap the cam for more power than the head swap would give..


Cheers, but swap it for what? I have nearly max torque between 2000 - 4000rpm which feels great but it tails of quickly between 4000-6500rpm. Boost is dead flat all the way along. I like the initial grunt but I want it to continue all the way through the rpm range. Surely a different cam will just move the curve up and down the range, not change its shape while being emissions friendly?

What makes you sure it's not flow capacity? I would have thought with better flow I need less duration which will pass emissions?


Edited by anonymous-user on Monday 17th May 14:14

ringram

14,702 posts

279 months

Monday 17th May 2010
quotequote all
wormus said:
while being emissions friendly?
Error!

You are therefore limited in your choice. Assuming your cam is at the limit now, heads will help. This is exactly why I have LS7 heads. A smaller cam will flow more air through the large LS7 valves.

Same applies to the LS3 type heads and 2.16" intake valve instead of the 2.0x" cathedrals.

Best head for emissions for you on 4" bore will be CNC Ported LS3 type heads or Mast/PI aftermarkets.

Ask yourself why GM went to these heads... Euro4 compliance, California compliance etc..

But they will probably lift your power up rather than carrying it forward in the RPM range.

anonymous-user

Original Poster:

85 months

Monday 17th May 2010
quotequote all
ringram said:
wormus said:
while being emissions friendly?


Error!

You are therefore limited in your choice. Assuming your cam is at the limit now, heads will help. This is exactly why I have LS7 heads. A smaller cam will flow more air through the large LS7 valves.

Same applies to the LS3 type heads and 2.16" intake valve instead of the 2.0x" cathedrals.

Best head for emissions for you on 4" bore will be CNC Ported LS3 type heads or Mast/PI aftermarkets.

Ask yourself why GM went to these heads... Euro4 compliance, California compliance etc..

But they will probably lift your power up rather than carrying it forward in the RPM range.


Thanks. I assume you are referring to these? www.mastmotorsports.com/black-label-page.php?id=104 .By the looks they should also fit Gen III LQ9 but I'm not sure if my blower will fit?

horsepower = (torque*engine speed) / 5252 so more power = more torque further up the RPM range?








Edited by anonymous-user on Monday 17th May 16:44