Clutch Issues, What To Go For?
Discussion
My clutch problems are gradually getting worse unfortunately so I need a new one!
Admittedly ive only had the car out 6 times this year so far but everytime the problem is getting worse, it has only appeared aswell since the cam/re-map where done on it.
If driving a little bit hard the pedal goes very hard and tends to stick to the floor, ive not noticed any slipping in any of the gears so im not sure what part of the clutch system is on its way out.
Regardless I need to find a new one and find something that is going to be future proof, im going to forge the internals later this year and get everything internally exactly as I want it before going for the centri charger next year.
The LS7 clutch I dont think will take the power levels im ultimately seeking, circa 700ish so whats my options?
I think the ACT (if thats the correct name?) have been mentioned quite a bit, and Jez mentioned another make but any advice and what to look for would be very helpfull?
It must be driveable, I dont want one of these on off things that makes you stall all the time!!
Admittedly ive only had the car out 6 times this year so far but everytime the problem is getting worse, it has only appeared aswell since the cam/re-map where done on it.
If driving a little bit hard the pedal goes very hard and tends to stick to the floor, ive not noticed any slipping in any of the gears so im not sure what part of the clutch system is on its way out.
Regardless I need to find a new one and find something that is going to be future proof, im going to forge the internals later this year and get everything internally exactly as I want it before going for the centri charger next year.
The LS7 clutch I dont think will take the power levels im ultimately seeking, circa 700ish so whats my options?
I think the ACT (if thats the correct name?) have been mentioned quite a bit, and Jez mentioned another make but any advice and what to look for would be very helpfull?
It must be driveable, I dont want one of these on off things that makes you stall all the time!!
Lots of good feedback for the ACT stuff from various places 
http://forums.corvetteforum.com/1572627488-post5.h...
Rated up to 1450ft/lb and SFI certified
All ACT LS series twin-disc kits include a CNC-machined and dynamically balanced flywheel to ensure smooth, trouble free installation and operation. Driver and spectator safety are top priority at ACT. Each assembly is tested and certified to meet SFI Spec 1.2 standards, which means that all XTREME twin-disc kits are legal for competition when SFI Spec 1.2 is required or recommended. Each XTREME kit comes complete with an official SFI sticker and a serial number as required for certification.
• SFI 1.2 approved
• Torque capacities from 850- 1450 lbs/ft of torque
• Available from street friendly to race ready

http://forums.corvetteforum.com/1572627488-post5.h...
Rated up to 1450ft/lb and SFI certified
All ACT LS series twin-disc kits include a CNC-machined and dynamically balanced flywheel to ensure smooth, trouble free installation and operation. Driver and spectator safety are top priority at ACT. Each assembly is tested and certified to meet SFI Spec 1.2 standards, which means that all XTREME twin-disc kits are legal for competition when SFI Spec 1.2 is required or recommended. Each XTREME kit comes complete with an official SFI sticker and a serial number as required for certification.
• SFI 1.2 approved
• Torque capacities from 850- 1450 lbs/ft of torque
• Available from street friendly to race ready
after_shock said:
My clutch problems are gradually getting worse unfortunately so I need a new one!
Admittedly ive only had the car out 6 times this year so far but everytime the problem is getting worse, it has only appeared aswell since the cam/re-map where done on it.
If driving a little bit hard the pedal goes very hard and tends to stick to the floor, ive not noticed any slipping in any of the gears so im not sure what part of the clutch system is on its way out.
Regardless I need to find a new one and find something that is going to be future proof, im going to forge the internals later this year and get everything internally exactly as I want it before going for the centri charger next year.
The LS7 clutch I dont think will take the power levels im ultimately seeking, circa 700ish so whats my options?
I think the ACT (if thats the correct name?) have been mentioned quite a bit, and Jez mentioned another make but any advice and what to look for would be very helpfull?
It must be driveable, I dont want one of these on off things that makes you stall all the time!!
If your peddle is sticking down then all yr problem is is the fluid boiling in the slave! Been discussed to death on here and the only way to solve it is to regularly renew the fluid which is a PITA due to the location of the slave drain tube! Yr clutch sounds fine as its not slipping and the peddle staying down is a classic sign of the slave not releasing or failing to release. Get someone like the fish to properly bleed it for you and it will be fine again, also when you do need to change the clutch get a remote bleed line fitted so you can regularly bleed it clean.Admittedly ive only had the car out 6 times this year so far but everytime the problem is getting worse, it has only appeared aswell since the cam/re-map where done on it.
If driving a little bit hard the pedal goes very hard and tends to stick to the floor, ive not noticed any slipping in any of the gears so im not sure what part of the clutch system is on its way out.
Regardless I need to find a new one and find something that is going to be future proof, im going to forge the internals later this year and get everything internally exactly as I want it before going for the centri charger next year.
The LS7 clutch I dont think will take the power levels im ultimately seeking, circa 700ish so whats my options?
I think the ACT (if thats the correct name?) have been mentioned quite a bit, and Jez mentioned another make but any advice and what to look for would be very helpfull?
It must be driveable, I dont want one of these on off things that makes you stall all the time!!
Clutch fluid has been changed twice this year already, last time done by the fish and it instantly started doing it again with the pedal sticking down, its doing it more and more and doing it when driving less hard. Broadslide had the exact same thing and only fix was to change the clutch.
The build I will be doing over the winter will purely concentrate on the engine and I dont want anything (or the least amount of things) to crop up that need fixing whilst thats going on, the clutch will need doing desperately once I push the power on a bit more.
The build I will be doing over the winter will purely concentrate on the engine and I dont want anything (or the least amount of things) to crop up that need fixing whilst thats going on, the clutch will need doing desperately once I push the power on a bit more.
after_shock said:
Good luck with it, hope you do get it back this year!
I may need to pick your brain with regards to forging the bottom end when you have a few mins as well.
Is there any point if you're not building a stroker? Rods and pistons, aye, but crank?I may need to pick your brain with regards to forging the bottom end when you have a few mins as well.
I'm sure StevieT would be the best guy to advise.
Magic919 said:
after_shock said:
Good luck with it, hope you do get it back this year!
I may need to pick your brain with regards to forging the bottom end when you have a few mins as well.
Is there any point if you're not building a stroker? Rods and pistons, aye, but crank?I may need to pick your brain with regards to forging the bottom end when you have a few mins as well.
I'm sure StevieT would be the best guy to advise.
Fitting a standard stroke forged crank when there is nothing wrong with the std crank is just throwing money away
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


