Discussion
I've found you a nice "baby" Cam for your 440 
http://partsworldperformance.com/ls_stage_3_camsha...
http://www.hotrod.com/techarticles/engine/hdrp_060...

http://partsworldperformance.com/ls_stage_3_camsha...
http://www.hotrod.com/techarticles/engine/hdrp_060...
Edited by gsd2000 on Saturday 22 May 11:46
Yeah that doesnt look too bad. Exhaust duration is interesting.
I would have liked to get this one.
HYDRAULIC ROLLER-Excellent top
end and high rpm power for race
style LS engines with aftermarket
rectangular port cylinder heads.
Hyd. Hyd. 2600 to 7200 54-472-11 293LRR HR14 293 309 243 259 .624 .624 114°
But I got this one instead. Close to the old specs, but a bit more exhaust duration.
HYDRAULIC ROLLER-Good street/
strip camshaft with wide range. Hyd. Hyd. 1900 to 7000 146-458-11 277LrR HR13 277 293 227 243 .614 .624 113°
I would have liked to get this one.
HYDRAULIC ROLLER-Excellent top
end and high rpm power for race
style LS engines with aftermarket
rectangular port cylinder heads.
Hyd. Hyd. 2600 to 7200 54-472-11 293LRR HR14 293 309 243 259 .624 .624 114°
But I got this one instead. Close to the old specs, but a bit more exhaust duration.
HYDRAULIC ROLLER-Good street/
strip camshaft with wide range. Hyd. Hyd. 1900 to 7000 146-458-11 277LrR HR13 277 293 227 243 .614 .624 113°
ringram said:
Yeah that doesnt look too bad. Exhaust duration is interesting.
I would have liked to get this one.
HYDRAULIC ROLLER-Excellent top
end and high rpm power for race
style LS engines with aftermarket
rectangular port cylinder heads.
Hyd. Hyd. 2600 to 7200 54-472-11 293LRR HR14 293 309 243 259 .624 .624 114°
But I got this one instead. Close to the old specs, but a bit more exhaust duration.
HYDRAULIC ROLLER-Good street/
strip camshaft with wide range. Hyd. Hyd. 1900 to 7000 146-458-11 277LrR HR13 277 293 227 243 .614 .624 113°
sounds good, what was your old spec then?I would have liked to get this one.
HYDRAULIC ROLLER-Excellent top
end and high rpm power for race
style LS engines with aftermarket
rectangular port cylinder heads.
Hyd. Hyd. 2600 to 7200 54-472-11 293LRR HR14 293 309 243 259 .624 .624 114°
But I got this one instead. Close to the old specs, but a bit more exhaust duration.
HYDRAULIC ROLLER-Good street/
strip camshaft with wide range. Hyd. Hyd. 1900 to 7000 146-458-11 277LrR HR13 277 293 227 243 .614 .624 113°
Do you run your otr all year round?
Would the cam that you like pass emissions in the UK?
oh yeah have you seen this?
http://www.ls1tech.com/forums/generation-iv-extern...
Might be worth it for you or gareth instead of running a fast intake.
http://www.ls1tech.com/forums/generation-iv-extern...
Might be worth it for you or gareth instead of running a fast intake.
Id like what Brummie has. A Kinsler ITB manifold. But they are mega.
The Fast102 is good for the street. The Jenvey looks interesting. But it will need filtering and ETC control to work with the E38 ECU... The Harrop works, but they dont have an LS7 version. You have to use a cruddy adapter.
The Fast102 is good for the street. The Jenvey looks interesting. But it will need filtering and ETC control to work with the E38 ECU... The Harrop works, but they dont have an LS7 version. You have to use a cruddy adapter.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


