OTR Cleaning
Author
Discussion

Bonnie and Clyde

Original Poster:

11,701 posts

223 months

Wednesday 26th May 2010
quotequote all
A friend of ours on here advised we clean the K&N panel filter on a regular basis.

Can anyone tell me how i do that.

TIA

S800VXR

5,877 posts

231 months

Wednesday 26th May 2010
quotequote all
Go buy some K&N cleaning spray and new spray oil. The box will say how to do it.

BTE E Bay is a good place to get the kit from.

S800VXR

5,877 posts

231 months

Wednesday 26th May 2010
quotequote all
BTW 2 - I doubt its dirty enough yet!

V88Dicky

7,373 posts

214 months

Wednesday 26th May 2010
quotequote all
Just done this myself. Really simple.

1. Remove filter
2. Gently clean in warm soapy water, using a soft paintbrush to agitate and loosen dirt.
3. Rinse thoroughly with lots of cold water.
4. Leave to dry gently (airing cupboard overnight?)
5. Once fully dry, lightly spray 3in1 oil or K+N filter oil onto the open side of the filter (the side that is open to the atmosphere).
6 Re-fit filter.


Enjoy, HTH

Bonnie and Clyde

Original Poster:

11,701 posts

223 months

Wednesday 26th May 2010
quotequote all
Cheers guys thats great thumbup

stigmundfreud

22,454 posts

241 months

Wednesday 26th May 2010
quotequote all
Are you mafless? If not I'd just wash it with water as that oil has a nasty habbit of fubaring the maf up

Bonnie and Clyde

Original Poster:

11,701 posts

223 months

Wednesday 26th May 2010
quotequote all
stigmundfreud said:
Are you mafless? If not I'd just wash it with water as that oil has a nasty habbit of fubaring the maf up
Not mafless. You love to confuse me I knew what i was doing until then

stigmundfreud

22,454 posts

241 months

Wednesday 26th May 2010
quotequote all
Bonnie and Clyde said:
stigmundfreud said:
Are you mafless? If not I'd just wash it with water as that oil has a nasty habbit of fubaring the maf up
Not mafless. You love to confuse me frown I knew what i was doing until then
oiled filters or rather over oiled filters kill mafs dead

Wolfracer

2,074 posts

237 months

Wednesday 26th May 2010
quotequote all
stigmundfreud said:
Bonnie and Clyde said:
stigmundfreud said:
Are you mafless? If not I'd just wash it with water as that oil has a nasty habbit of fubaring the maf up
Not mafless. You love to confuse me I knew what i was doing until then


oiled filters or rather over oiled filters kill mafs dead

Is that not why you oil the Atmos' side? Surely if oil can leak through a filter, it ain't filtering???

monkfish1

12,522 posts

255 months

Thursday 27th May 2010
quotequote all
We re-oil them on services all the time and ive never known a maf failure as a result.

Im sure with enough oil it could be done, but you would have to be pretty careless.

tattooboy

7,946 posts

209 months

Thursday 27th May 2010
quotequote all
Bonnie and Clyde said:
A friend of ours on here advised we clean the K&N panel filter on a regular basis.

Can anyone tell me how i do that.

TIA


Your a woman and you don't know !!!!!!

Just stick it in the washing machine on a cool cycle like the rest of the stuff your suppose to be washing rofl

S800VXR

5,877 posts

231 months

Thursday 27th May 2010
quotequote all
Bonny - Clean the filter with proper K&N cleaning spray! it does make a difference. Leave to dry as already advised - natural open air though no force drying then lighty spray the outside of the filter with K&N oil - NOT any other oil! then let it go touch dry after soaking in for a few hours. As Roger has said, done properly the oil will not harm the MAF so just a light dusting of oil is all thats needed, you do not need to have it dripping like I have seen some do.