Fitted these ITB's
Discussion
Fitted these today, with alot of help from Craig at Dyno Torque, the tickover has gone from lumpy to silky smooth at 700rpm, dont forget my cam is 247/256!
Only have the bodys fitted and need to make the now very short trumpets fit, and knock an airbox up..
Craig with his super trick TIG welding will be sealing it all up!

Only have the bodys fitted and need to make the now very short trumpets fit, and knock an airbox up..
Craig with his super trick TIG welding will be sealing it all up!


Brummmie said:
Fitted these today, with alot of help from Craig at Dyno Torque, the tickover has gone from lumpy to silky smooth at 700rpm, dont forget my cam is 247/256!
Only have the bodys fitted and need to make the now very short trumpets fit, and knock an airbox up..
Craig with his super trick TIG welding will be sealing it all up!

Only have the bodys fitted and need to make the now very short trumpets fit, and knock an airbox up..
Craig with his super trick TIG welding will be sealing it all up!

YOU DIRTY BASTARD!!!!!
Porn should be kept for the over 18 forum.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff






