Headunit removal
Author
Discussion

Granby

Original Poster:

2,473 posts

246 months

Saturday 29th May 2010
quotequote all
I want to change my headunit to a Kenwood double din unit i already have, I've followed the instructions here http://www.ls1gto.com/forums/showthread.php?t=1785... but i having problems getting the original metal cage out, I've checked that all the screws are out but it seems to be stuck at the top, is there any knack to getting these out

MyM8V8

9,468 posts

226 months

Sunday 30th May 2010
quotequote all
Reading that thread, you have forgotten the two tabs on the top of the cage. Apparently it said to use a flat blade or something to work the tabs down.

I'm interested in this as I need to do it myself at some stage. I have a nice Pioneer Avic to fit.

boggie

393 posts

253 months

Sunday 30th May 2010
quotequote all
Correct! I had the same issue removing mine. There are two small metal tabs/catches at the top, near the front. You need to release these by bending the top of the cage down slightly and pulling forward / down.

Hope that helps

Granby

Original Poster:

2,473 posts

246 months

Monday 31st May 2010
quotequote all
Cheers for that, will give it another try this week sometime smile