Discussion
Apart from price and quality, whats the difference between buying a known brand of exhaust Header compaired to having one made up?
Do they all make the same power, or do made up ones produce less power as they have not been tested for power output.
I expect the same questions could be asked about the rest of the exhaust system.
Do they all make the same power, or do made up ones produce less power as they have not been tested for power output.
I expect the same questions could be asked about the rest of the exhaust system.
I think given that the cost of buying either a Monaro or VXR8 is getting lower all the time the percentage cost (of the value of the car) of some of the aftermarket products available is now starting to price them out of the market.
Regardless of how good they were I'd not spend up to 20% of the total worth of any car just on headers.
Regardless of how good they were I'd not spend up to 20% of the total worth of any car just on headers.
Magic919 said:
Headers vary in terms of sizing and topology. Aside from diameter there are long tube headers and shorties. Just having a label on the side does not affect performance.
I've got some Pacemaker headers on mine. They weren't a scary price.
are pacemakers, mild steel? Also which cat's have you got on your r8?I've got some Pacemaker headers on mine. They weren't a scary price.
mfp4073 said:
OK,are custom made headers if made up by a decent company as good as a Branded header? let's be honest the design of the header must be dictated by the amout of space you have to fit them? or am I missing something...again!
Hi Jon. You're welcome to come out for a run in mine if you want. It now has the entire system made by AAS. Headers, cats and exhaust

Do a search for "auto exhaust science" loads of info on what makes a good exhaust there.
Also research merge headers, try-y, 4 into 1, long tubes. Exhaust tuning etc.
You will then form an idea of what you want based on how you want to drive the car.
You can then see who sells what etc.
Also research merge headers, try-y, 4 into 1, long tubes. Exhaust tuning etc.
You will then form an idea of what you want based on how you want to drive the car.
You can then see who sells what etc.
gsd2000 said:
Magic919 said:
Headers vary in terms of sizing and topology. Aside from diameter there are long tube headers and shorties. Just having a label on the side does not affect performance.
I've got some Pacemaker headers on mine. They weren't a scary price.
are pacemakers, mild steel? Also which cat's have you got on your r8?I've got some Pacemaker headers on mine. They weren't a scary price.
mfp4073 said:
V88DICKY,
Hello there, so you finally did it then! I would be very interested in seeing the system you've had fitted, I'm away most of this month so maybe we can arrange something later on. Thanks for the offer. Did you have to get a re-map?
Regards John.
Hello there, so you finally did it then! I would be very interested in seeing the system you've had fitted, I'm away most of this month so maybe we can arrange something later on. Thanks for the offer. Did you have to get a re-map?
Regards John.
No re-map as of yet mate, but the cars running fine at the mo. Let me know when and where and I'll have a tootle on down to sunny Teeside
MyM8V8 said:
Here's one good piece of advice:
Don't buy Difillipo - they're s
t. (i.e. champagne prices for Ginger beer product)
They're not that bad Don't buy Difillipo - they're s
t. (i.e. champagne prices for Ginger beer product)
I quite like mine. The headers anyway (coated of course so they don't look crap after a bit of use)Agree the rest of the system is below par
Here is the sound of my car with its headers and cats from AAS
www.youtube.com/watch?v=MqKM6BzuI9w
www.youtube.com/watch?v=5XSDjLmIYro
Has a Wortec cat back system but the center boxes have been removed
www.youtube.com/watch?v=MqKM6BzuI9w
www.youtube.com/watch?v=5XSDjLmIYro
Has a Wortec cat back system but the center boxes have been removed

Your welcome to look at mine aswell if you want anytime!
Basically the branded ones are made by an exhaust fabrication company exactly the same as the after market ones, id challenge the quality on the branded ones to be better in any area than the ones that have been made by AAS.
Ultimately the custom ones you can get done to any spec you want, as mentioned above get short, long or choose the size of the actual pipe work and what size cats they run into.
Basically the branded ones are made by an exhaust fabrication company exactly the same as the after market ones, id challenge the quality on the branded ones to be better in any area than the ones that have been made by AAS.
Ultimately the custom ones you can get done to any spec you want, as mentioned above get short, long or choose the size of the actual pipe work and what size cats they run into.
MadMaxHSV said:
MyM8V8 said:
Here's one good piece of advice:
Don't buy Difillipo - they're s
t. (i.e. champagne prices for Ginger beer product)
They're not that bad Don't buy Difillipo - they're s
t. (i.e. champagne prices for Ginger beer product)
I quite like mine. The headers anyway (coated of course so they don't look crap after a bit of use)Agree the rest of the system is below par
The standard of welding also leaves a lot to be desired!! I suppose they will work better on a bigger blown motor though than 1.5/8".
They need to be coated due to them using 409 stainless, which isn't "stainless"! Anyway, once bitten twice shy, as they say.
I'd have to say I would go custom for the price next time. The boys at AAS seem to have a good rep'.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



