Discussion
Taking a leaf out of Wormus's book. I figure if something needs fixing then you might as well upgrade at the same time.
Enter Proheads.com 400cfm GMPP LSX CNC Heads with thicker deck, reinforced spring and rocker bosses/pads.
I also need to make sure Brummie doest come close in the NA stakes!



There should be a set of stock GMPP CNC 360+CFM heads up for grabs if anyone is interested afterwards. Though they might be useful down the line for a corvette project or similar.
Enter Proheads.com 400cfm GMPP LSX CNC Heads with thicker deck, reinforced spring and rocker bosses/pads.
I also need to make sure Brummie doest come close in the NA stakes!



There should be a set of stock GMPP CNC 360+CFM heads up for grabs if anyone is interested afterwards. Though they might be useful down the line for a corvette project or similar.
ringram said:
Lots I think.. when he gets it tuned nice.. assuming diameter and lenght of trumpets are right and dont peak at 9000rpm
Just seen this, custom alloy plenum in progress
!http://www.pistonheads.com/gassing/topic.asp?h=0&a...
You guys just cant compete with the best NA results on the forum! (Charile's highest ever NA results on his dyno!) So you give up and play the joker card (FI)
Im not rising to the bait. Ive always said ultimately NA will fall into second. But its taken forced induction built & forged strokers to do that.

Im not rising to the bait. Ive always said ultimately NA will fall into second. But its taken forced induction built & forged strokers to do that.

ringram said:
You guys just cant compete with the best NA results on the forum! (Charile's highest ever NA results on his dyno!) So you give up and play the joker card (FI)
Im not rising to the bait. Ive always said ultimately NA will fall into second. But its taken forced induction built & forged strokers to do that.

Im not rising to the bait. Ive always said ultimately NA will fall into second. But its taken forced induction built & forged strokers to do that.



Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff





