OTR & sensors
Author
Discussion

Monaro5.7

Original Poster:

7,337 posts

210 months

Friday 4th June 2010
quotequote all
After a bit shopping about and taking advice and watching other threads on this topic i haveent and bought a OTR. But the one i have wennt for allows me to use the Maff. The reason for this is that 2 have the car remapped its a 700 mile round trip and i only wanna have the car done once after the engine work is done.

But when i was fitting ma throttle body the other nite i noticed a sensor on the Maff pipe. What is this sensor? look like it might be a temp sensor. I have pics of the otr iam getting and i dont see a space for this sensor, So what do i do when it comes 2 fitting the otr?

Or should i stop worrying and wait till it arrives biglaugh

gsd2000

11,515 posts

214 months

Friday 4th June 2010
quotequote all
Could the sensor be your IAT (intake air temperature)?

Tattooboy

7,946 posts

209 months

Friday 4th June 2010
quotequote all
Where is the sensor? on the maff? if so, this won't be a problem will it ?

Monaro5.7

Original Poster:

7,337 posts

210 months

Friday 4th June 2010
quotequote all
Tattooboy said:
Where is the sensor? on the maff? if so, this won't be a problem will it ?


Nope it in the maff pipe after the Maff

Monaro5.7

Original Poster:

7,337 posts

210 months

Friday 4th June 2010
quotequote all
gsd2000 said:
Could the sensor be your IAT (intake air temperature)?


That would sound about right its a tiny wee thing.

Tattooboy

7,946 posts

209 months

Friday 4th June 2010
quotequote all
Monaro5.7 said:
gsd2000 said:
Could the sensor be your IAT (intake air temperature)?
That would sound about right its a tiny wee thing.
Would it not just be the sensor measuring the air intake to calc the fuel intake by the ecu?

Monaro5.7

Original Poster:

7,337 posts

210 months

Friday 4th June 2010
quotequote all
Tattooboy said:
Monaro5.7 said:
gsd2000 said:
Could the sensor be your IAT (intake air temperature)?


That would sound about right its a tiny wee thing.


Would it not just be the sensor measuring the air intake to calc the fuel intake by the ecu?


Possibly might phone my contact at Vauxhall and ask them

motomk

2,188 posts

275 months

Saturday 5th June 2010
quotequote all


If it is the holes in these it is the IAT (temperature) sensor.
Pictured above are various intake items. Top is an original Powertorque OTR CAI, to the left a GTS(GTS-R in the UK) MAF pipe, on the right a VYII MAF tube (same as a Big boot V2 series III Monaro)
The temperature sensor in the VYII tube is missing as it is in the OTR CAI. I think it involved ripping into a metal clip that held it into the pipe initially.
To mount it in the OTR CAI it uses the same principal as the GTS (GTSR) pipe. There is a hole in the OTR CAI to mount it. It goes through a rubber grommet. The rubber grommet is the same as used to mount the airbox and the coolant tank.

doleboy

747 posts

248 months

Saturday 5th June 2010
quotequote all
From your profile looks like you've a 2004 car. These have a separate Air intake temperature sensor. You'll have a small sensor up the MAF pipe away from the MAF. The MAF connector (I think) will have a 3-pin conector.

For 2005 and later, the intake temp sensor is integrated in the MAF. The MAF has more connectors (5 I think)

Some OTR's include a bung for relocating the temp sensor, sometimes there's a cable extension aswell, other times a gromet and instructions on where to drill a hole in the pipework.





Monaro5.7

Original Poster:

7,337 posts

210 months

Saturday 5th June 2010
quotequote all
doleboy said:
From your profile looks like you've a 2004 car. These have a separate Air intake temperature sensor. You'll have a small sensor up the MAF pipe away from the MAF. The MAF connector (I think) will have a 3-pin conector.

For 2005 and later, the intake temp sensor is integrated in the MAF. The MAF has more connectors (5 I think)

Some OTR's include a bung for relocating the temp sensor, sometimes there's a cable extension aswell, other times a gromet and instructions on where to drill a hole in the pipework.


Cool i will wait and see




monkfish1

12,522 posts

255 months

Saturday 5th June 2010
quotequote all
fit an 85mm maf, no seperate sensor required.

monaro5.7

Original Poster:

7,337 posts

210 months

Monday 7th June 2010
quotequote all
OTR arived from Oz today and there is a sensor hole on the back of it for the air temp sensor.

But will have to extend the loom 2 the sensors

motomk

2,188 posts

275 months

Monday 7th June 2010
quotequote all
monaro5.7 said:
OTR arived from Oz today and there is a sensor hole on the back of it for the air temp sensor.

But will have to extend the loom 2 the sensors


On my Commodore I think all I had to cut was a cable tie so the sensor plug could reach. The cable tie was holding some of convoluted pipe near the radiator. Once the cable tie had been cut the convoluted pipe would stretch over to the sensor hole.

Monaro5.7

Original Poster:

7,337 posts

210 months

Monday 7th June 2010
quotequote all
motomk said:
monaro5.7 said:
OTR arived from Oz today and there is a sensor hole on the back of it for the air temp sensor.

But will have to extend the loom 2 the sensors


On my Commodore I think all I had to cut was a cable tie so the sensor plug could reach. The cable tie was holding some of convoluted pipe near the radiator. Once the cable tie had been cut the convoluted pipe would stretch over to the sensor hole.


Cool ill have a look tomorrow when i go to fit it, But ur right about its placement

gsd2000

11,515 posts

214 months

Monday 7th June 2010
quotequote all
Where did you get the otr from?

Monaro5.7

Original Poster:

7,337 posts

210 months

Monday 7th June 2010
quotequote all
gsd2000 said:
Where did you get the otr from?


Got it from Oz, Got otr and end caps to finish it off for a really good price and only took 4 days to get it delivered

It came from a company called Holden Original Parts and a big thanks 2 Fab who i have been chatting 2 really helpfull guy hope 2 deal with him again.

Couple of pics of the otr





I know not aswell finished as other but still looks good and i got the end caps aswell

Edited by Monaro5.7 on Monday 7th June 19:03

gsd2000

11,515 posts

214 months

Monday 7th June 2010
quotequote all
Looks good, im going to start my otr project in the next few months.

Monaro5.7

Original Poster:

7,337 posts

210 months

Monday 7th June 2010
quotequote all
gsd2000 said:
Looks good, im going to start my otr project in the next few months.


You buying one or making one?

gsd2000

11,515 posts

214 months

Monday 7th June 2010
quotequote all
Monaro5.7 said:
gsd2000 said:
Looks good, im going to start my otr project in the next few months.
You buying one or making one?
making

Monaro5.7

Original Poster:

7,337 posts

210 months

Monday 7th June 2010
quotequote all
gsd2000 said:
Monaro5.7 said:
gsd2000 said:
Looks good, im going to start my otr project in the next few months.


You buying one or making one?


making


Cool be nice to see the results