low trac - traction control is not working!?
Discussion
xover said:
I have a monaro VXR 56 and with 285/30/19 HSV alloys. I have not seen the 'low trac' light up when the traction control is engaged and the rear wheels light up. Is there a problem with the TC or does it just not work very well.
Thanks
traction control is not the best. but as with all TC systems if both drive wheels are moving at the same rate / speed even if your standing stell traction control does not think these is an issue. any thing fancyer is call ESP..Thanks
xover said:
I have a monaro VXR 56 and with 285/30/19 HSV alloys. I have not seen the 'low trac' light up when the traction control is engaged and the rear wheels light up. Is there a problem with the TC or does it just not work very well.
Thanks
welcome to the forum of choiceThanks

what did you have done to fit that size wheel on your car ??
i have vxr8 wheels on my ro with 285's
also pics of your car , are the law here

mel will be along soon to tell you

xover said:
so if both wheels loose grip equally it will not kick in?
I have the car at 45 degrees in a straight line in the wet and no 'low trac'
I have the car at 45 degrees in a straight line in the wet and no 'low trac'
i have managed to leave a wacking pair of 11's on a few occasions due to this.you should get low trac flick up from time to time though if not never / at all i would suppeact a problem some where. easy way yo test if its working is try and do a wheel spin from a standing start.
not allways check the fuses
welcome BTW
is your ro a big boot (04) or a small boot (05) model
also what mods you got?
Edited by the_ferret82 on Tuesday 8th June 16:53
xover said:
at the moment, i only have polyurethene suspension bushes and a short shifter.
It has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
were are you based ..It has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
suspention
from monkfish http://www.monkfishperformance.co.uk/monaro.html
Edited by 007 VXR on Tuesday 8th June 17:59
xover said:
at the moment, i only have polyurethene suspension bushes and a short shifter.
It has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
RecommendIt has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
Monkfish RRP
Monkfish rear end pac
Monkfish Heavy duity drop links
those will make the handeling much better
as for more power wortec cat back a min and a remap.

if you want more handeling look at pedlers suppenshion
the_ferret82 said:
xover said:
at the moment, i only have polyurethene suspension bushes and a short shifter.
It has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
RecommendIt has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
Monkfish RRP
Monkfish rear end pac
Monkfish Heavy duity drop links
those will make the handeling much better
as for more power wortec cat back a min and a remap.

if you want more handeling look at pedlers suppenshion

BTW, welcome to the site.

edit ** and boot size.

Edited by ARAF on Tuesday 8th June 20:58
ARAF said:
the_ferret82 said:
xover said:
at the moment, i only have polyurethene suspension bushes and a short shifter.
It has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
RecommendIt has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
Monkfish RRP
Monkfish rear end pac
Monkfish Heavy duity drop links
those will make the handeling much better
as for more power wortec cat back a min and a remap.

if you want more handeling look at pedlers suppenshion

BTW, welcome to the site.

edit ** and boot size.

Edited by ARAF on Tuesday 8th June 20:58

Tattooboy said:
ARAF said:
the_ferret82 said:
xover said:
at the moment, i only have polyurethene suspension bushes and a short shifter.
It has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
RecommendIt has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
Monkfish RRP
Monkfish rear end pac
Monkfish Heavy duity drop links
those will make the handeling much better
as for more power wortec cat back a min and a remap.

if you want more handeling look at pedlers suppenshion

BTW, welcome to the site.

edit ** and boot size.

Edited by ARAF on Tuesday 8th June 20:58



ARAF said:
Tattooboy said:
ARAF said:
the_ferret82 said:
xover said:
at the moment, i only have polyurethene suspension bushes and a short shifter.
It has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
RecommendIt has the small boot.
I want to increase torque in the higher gears and also improve the handling, any recommendations?
Monkfish RRP
Monkfish rear end pac
Monkfish Heavy duity drop links
those will make the handeling much better
as for more power wortec cat back a min and a remap.

if you want more handeling look at pedlers suppenshion

BTW, welcome to the site.

edit ** and boot size.

Edited by ARAF on Tuesday 8th June 20:58



you know what I meant !!Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


