Engine bay covers
Discussion
MartinD said:
Hmm.. that's a pity as it really tidies up the engine bay 
Not sure what you mean with the holes though?
im assuming you have a 2004 model monaro. correct me if im wrong. (big boot, single sided exhaust)
Not sure what you mean with the holes though?
if i am correct and you open the bonnet of your car and compare to the pic you will notice stuff like the washer bottle etc is in different places. these differences will create the holes...
04 engine bay... (best pic i have)

compare with the top pic...
Edited by the_ferret82 on Thursday 10th June 17:18
the_ferret82 said:
thats a LS2 in the pic. the front plastic moulding is different as you point on to a LS1. (assuming you have a 04 RO)
no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
Incorrect. That is an LS1 in the pic. They are 2005 CV8 covers. We normally keep these though we are out of stock at the moment. You can fit these to 04 cars too.
Edited by monkfish1 on Thursday 10th June 18:12
monkfish1 said:
the_ferret82 said:
thats a LS2 in the pic. the front plastic moulding is different as you point on to a LS1. (assuming you have a 04 RO)
no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
Incorrect. That is an LS1 in the pic. They are 2005 CV8 covers. We normally keep these though we are out of stock at the moment. You can fit these to 04 cars too.no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
Edited by monkfish1 on Thursday 10th June 18:12
the_ferret82 said:
monkfish1 said:
the_ferret82 said:
thats a LS2 in the pic. the front plastic moulding is different as you point on to a LS1. (assuming you have a 04 RO)
no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
Incorrect. That is an LS1 in the pic. They are 2005 CV8 covers. We normally keep these though we are out of stock at the moment. You can fit these to 04 cars too.
Edited by monkfish1 on Thursday 10th June 18:12
i thought he was on about the black plastic bit at the front of the bay. or am i having a bad day.
I think its me having a bad day - your right. But it is an LS1

monkfish1 said:
the_ferret82 said:
monkfish1 said:
the_ferret82 said:
thats a LS2 in the pic. the front plastic moulding is different as you point on to a LS1. (assuming you have a 04 RO)
no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
Incorrect. That is an LS1 in the pic. They are 2005 CV8 covers. We normally keep these though we are out of stock at the moment. You can fit these to 04 cars too.no sure you can get a "bigger" one for a 04 car that will fit without random holes all over the place.
Edited by monkfish1 on Thursday 10th June 18:12

MartinD said:
Is there a source/supplier we can get these from?
As in this pic:
See the bit at the front - it goes right up to the intake. In mine, it's not as deep and only comes up as far as the fold in the one above (if that makes sense?) I'd like to get a bigger one as in the photo
As in this pic:
See the bit at the front - it goes right up to the intake. In mine, it's not as deep and only comes up as far as the fold in the one above (if that makes sense?) I'd like to get a bigger one as in the photo
Its just an 05 panel. Should go straight onto an 04 though never tried it. Might have one, but would have to check.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


