LS3 intake?
Author
Discussion

ringram

Original Poster:

14,702 posts

279 months

Thursday 10th June 2010
quotequote all
Just wondering if anyone with a TVS has a spare LS3 intake they want to sell?
I dont need/want one yet, just making tentative plans...

gsd2000

11,515 posts

214 months

Thursday 10th June 2010
quotequote all
i thought you already had a fast intake though

jhinchy

298 posts

230 months

Thursday 10th June 2010
quotequote all
you have mentioned mast ls3 style heads for ls1....
there must be a new project on the horizon!!

ringram

Original Poster:

14,702 posts

279 months

Thursday 10th June 2010
quotequote all
I have a ported LS7 intake smile

Just thinking about LS2 -> LS3 top end upgrades and suitable cams for a possible new project.

Anyway, why arnt you reassembling gearboxes?

stigmundfreud

22,454 posts

241 months

Thursday 10th June 2010
quotequote all
told you that you should have waited for the ls3 block!

gsd2000

11,515 posts

214 months

Thursday 10th June 2010
quotequote all
ringram said:
I have a ported LS7 intake smile

Just thinking about LS2 -> LS3 top end upgrades and suitable cams for a possible new project.

Anyway, why arnt you reassembling gearboxes?
i was waiting for some tools to arrive as i broke them with my super strength lol

i will continue tomorrow

ringram

Original Poster:

14,702 posts

279 months

Friday 11th June 2010
quotequote all
stigmundfreud said:
told you that you should have waited for the ls3 block!
For an LS2 block...
Anyway, LS3's are for losers biggrin

stigmundfreud

22,454 posts

241 months

Friday 11th June 2010
quotequote all
ringram said:
stigmundfreud said:
told you that you should have waited for the ls3 block!
For an LS2 block...
Anyway, LS3's are for losers biggrin
Tell me more about your Fiesta experiences wink I think we all know the LS3 trumps everything!

ringram

Original Poster:

14,702 posts

279 months

Friday 11th June 2010
quotequote all
stigmundfreud said:
Tell me more about your Fiesta experiences wink I think we all know the LS3 trumps everything!
I would if I wasnt so emotionally scared by the experience that Ive repressed all knowledge of it.

gsd2000

11,515 posts

214 months

Friday 11th June 2010
quotequote all
Ringram why not buy some jenvey itbs instead

ringram

Original Poster:

14,702 posts

279 months

Friday 11th June 2010
quotequote all
Because they are cable. You would have to sort out some sort of linkage to allow the ETC motor to drive them. Which I guess is possible.
Even on LS1's with cable they are no good, because then you have nowhere to mount your IAC control.

MyM8V8

9,468 posts

226 months

Friday 11th June 2010
quotequote all
Vette.

gsd2000

11,515 posts

214 months

Friday 11th June 2010
quotequote all
MyM8V8 said:
Vette.
is that his new project?

I thought it might have been a ute for some reason

ringram

Original Poster:

14,702 posts

279 months

Saturday 12th June 2010
quotequote all
Im looking at something tomorrow. Its an 05 which was a bd year for vette's. ECU, Trans, Diff were all changed the year after and the diff is very weak, so Im not sure. Of course you can buy upgrades, but thats ££. Best would be an 06+ but then they cost more.
I was looking at a couple of Z06's but they are like £20k more. Which buys a lot of mods, but may be more collectable in the long run. Maintenance parts would be expensive though in the Z06.
I need something to reflect my middle age status and show the girly FI lot how NA is superior in all respects. Goal would be 450rwhp from an LS2 NA smile Kerb weight around 1400kg.. Standard rear are 19x10 rims, will take 11" no problems. Thats a 325 tyre..

ARAF

20,759 posts

254 months

Saturday 12th June 2010
quotequote all
ringram said:
stigmundfreud said:
told you that you should have waited for the ls3 block!
For an LS2 block...
Anyway, LS3's are for losers biggrin
I know it cost Sam a few grand to get the same power from his LS2 as our LS3, but I'm sure you're right.

There again, scratchchin any LS power is better than no LS power. hehe

ringram

Original Poster:

14,702 posts

279 months

Saturday 12th June 2010
quotequote all
Sam?
What did he do? I had 360rwhp from an LS2 which is 15rwhp more than stig got from his (which was 2nd highest tuned LS3 at the last dyno day)

Thats just with tune, rockers and intake. Total cost about £500.

So spending a few grand isnt required if you know what you are doing smile



Edited by ringram on Saturday 12th June 10:54

ARAF

20,759 posts

254 months

Saturday 12th June 2010
quotequote all
ringram said:
Sam?
What did he do? I had 360rwhp from an LS2 which is 15rwhp more than stig got from his (which was 2nd highest tuned LS3 at the last dyno day)

Thats just with tune, rockers and intake. Total cost about £500.

So spending a few grand isnt required if you know what you are doing smile
In fairness, Sam has always chased acoustics rather than performance. However, if someone were being serious, I wonder what the £500 could have bought for an LS3. scratchchin

ringram

Original Poster:

14,702 posts

279 months

Saturday 12th June 2010
quotequote all
Yeah, given the stock engine does 345rwhp anyway. Id buy an OTRCAI for the LS3 and tune it mafless. You might be able to get 1.8:1 rockers for it as well. Im not sure. But figure perhaps 375 or 380rwhp in that instance.. The LS7 rockers are 1.8, but the offset might not match the LS3 offset.
There are a couple of ways of getting power. 1. Decide your BHP goal and then let the budget follow. Or 2. Set your budget and get as much as possible. The exhaust is rarely a good place to start IMO. Though it does follow pretty soon.
If you consider a larger diameter exhaust will only be used at max rpm, then for 95% of the time the stock exhaust will flow enough for daily driving RPM's. So intake, fueling and air temp are where your quick wins are in that instance.
Of course everyone gets an exhaust pays heaps and gets a small peak gain. But what do I know.

stigmundfreud

22,454 posts

241 months

Saturday 12th June 2010
quotequote all
yes but all I need to do is add rockers et voila, for 500 quid I can get what will cost you the moon on a stick. Then I might get bored and put a cam on = yaa boo to you. Seriously why you guys bang on about tuning the antiquated ls1's and 2's is beyond me. Get a good starting block and mod from there. I am sure wormus will be along shortly to say about how much power you can get from the ls1 but if he started with an LS3 it would cost less and be more.

Besides at the rr day my car was stock!

ARAF

20,759 posts

254 months

Saturday 12th June 2010
quotequote all
stigmundfreud said:
yes but all I need to do is add rockers et voila, for 500 quid I can get what will cost you the moon on a stick. Then I might get bored and put a cam on = yaa boo to you. Seriously why you guys bang on about tuning the antiquated ls1's and 2's is beyond me. Get a good starting block and mod from there. I am sure wormus will be along shortly to say about how much power you can get from the ls1 but if he started with an LS3 it would cost less and be more.

Besides at the rr day my car was stock!
Isn't 'stock' supposed to be manufacturer's spec? scratchchin You're getting as bad as Mel. hehe