Ok, first question
Author
Discussion

satsuma71

Original Poster:

177 posts

197 months

Saturday 12th June 2010
quotequote all
He he, said i would be asking questions, only had my 6 ltr Monaro for 2 months, it is an Jan 07 on a 56 plate, 34k, full service history, it has an uneven idle, sometimes more so than others, also has 2 DTCs, but my scanner won't recognise the protocol, just says B2aaa, anyhow, any ideas folks ?

Cheers

Sats

MEATANDCHEESE

409 posts

198 months

Saturday 12th June 2010
quotequote all
Welcome M8

Mine has a slightly uneven Idle but I think that it's normal.

I used to have a X5 4.4 that I could sit my tea on without spilling but I wouldn't get away with that now.

(I WILL TRY THOUGH!) laugh

the_ferret82

25,627 posts

215 months

Saturday 12th June 2010
quotequote all
satsuma71 said:
He he, said i would be asking questions, only had my 6 ltr Monaro for 2 months, it is an Jan 07 on a 56 plate, 34k, full service history, it has an uneven idle, sometimes more so than others, also has 2 DTCs, but my scanner won't recognise the protocol, just says B2aaa, anyhow, any ideas folks ?

Cheers

Sats
idle should be pretty smooth unless you have big mods on the car. any mods?

satsuma71

Original Poster:

177 posts

197 months

Saturday 12th June 2010
quotequote all
Hi guys, no mods at all YET, want to sort the exhaust first, but would like to mfind out what the error codes are, as the idle is certainly a bit rough.
Previous car was a 350z, and that was silky smooth at idle.

Edited by satsuma71 on Saturday 12th June 19:46

the_ferret82

25,627 posts

215 months

Saturday 12th June 2010
quotequote all
satsuma71 said:
Hi guys, no mods at all YET, want to sort the exhaust first, but would like to mfind out what the error codes are, as the idle is certainly a bit rough.
where are you located a few of us have readers as well that could help.

as for rough idle would start with checking plus and leads and for loose screws on the air intake

satsuma71

Original Poster:

177 posts

197 months

Saturday 12th June 2010
quotequote all
Located in Cheshire, i have just changed the plugs, air filter and oil etc, comes with a Network q warranty, BUT, don't fancy the local VX monkeys messing with it, i own a small workshop and MOT station, so have no problems stripping down etc, have 2 code readers for my customers cars, but the buggers wont read the codes from this beastie.

neiljohnson

11,298 posts

238 months

Saturday 12th June 2010
quotequote all
satsuma71 said:
Located in Cheshire, i have just changed the plugs, air filter and oil etc, comes with a Network q warranty, BUT, don't fancy the local VX monkeys messing with it, i own a small workshop and MOT station, so have no problems stripping down etc, have 2 code readers for my customers cars, but the buggers wont read the codes from this beastie.
Off i have a delphi ds 100 and am old omnitec and both will read ros and r8s what scanners are you using?

the_ferret82

25,627 posts

215 months

Saturday 12th June 2010
quotequote all
dont blame you on the VX monkeys comment.

if you have done all the plugs etc im out of ideas. as for code reading i use a copy of Scan-XL on the laptop and its had no issues with my Ro so far.

hopefully one of the other guys here can help you out. if not look up the number for monkfish and ask them

satsuma71

Original Poster:

177 posts

197 months

Saturday 12th June 2010
quotequote all
Both my scanners are Omitec, one, is the latest, it will allow me to see live data, but doesn't recognise the DTCs, just says 2 error codes, B2AAA not recognised.

neiljohnson

11,298 posts

238 months

Saturday 12th June 2010
quotequote all
satsuma71 said:
Both my scanners are Omitec, one, is the latest, it will allow me to see live data, but doesn't recognise the DTCs, just says 2 error codes, B2AAA not recognised.
scratchchin is that through eobd?

satsuma71

Original Poster:

177 posts

197 months

Saturday 12th June 2010
quotequote all
Yep eobd

neiljohnson

11,298 posts

238 months

Saturday 12th June 2010
quotequote all
satsuma71 said:
Yep eobd
very odd im not sure then sorry confused

satsuma71

Original Poster:

177 posts

197 months

Saturday 12th June 2010
quotequote all
No problem, i appreciate your help


neiljohnson

11,298 posts

238 months

Saturday 12th June 2010
quotequote all
Just googled it & found this http://www.g8board.com/forums/showthread.php?p=427...
mentions its a software issue with the scanner ???? but then goes on to mention lambda sensor faults. As you can get into live data see what readings the sensors are giving & go from there biggrin Could be an air leak is your culprit.

hth Neil

monkfish1

12,522 posts

255 months

Saturday 12th June 2010
quotequote all
An uneven "quiver" at idle is normal. Anything more is a problem. Really need to know those codes!

IanLWarrington

390 posts

198 months

Saturday 12th June 2010
quotequote all
Hi Sats,

Welcome - I'm in Cheshire too and I have a 2006 VXR. Not sure how far away you are but you are welcome to come and have a listen to mine!

Failing that, there is a great Vauxhall specialist in Chester <http://www.mwperformance.co.uk/> who might be able to help.

If you get nowhere in the next few weeks though I'm taking some time off work and would be happy to meet halfway.

Send me an email ...

Enjoy!

Ian

satsuma71

Original Poster:

177 posts

197 months

Sunday 13th June 2010
quotequote all
Neil, Monkfish, thanks guys
Ian, would love to hear yours, whats your E Mail address, cheers

Sats

satsuma71

Original Poster:

177 posts

197 months

Monday 14th June 2010
quotequote all
Right, a friend came into my workshop today, who knows a guy in a Vauxhall dealership workshop, he he, the beastie goes on the TECH 2 TOMORROWwoohoo so we will see what we see.

neiljohnson

11,298 posts

238 months

Monday 14th June 2010
quotequote all
satsuma71 said:
Right, a friend came into my workshop today, who knows a guy in a Vauxhall dealership workshop, he he, the beastie goes on the TECH 2 TOMORROWwoohoo so we will see what we see.
The tech2 will only work if its been given the monaro/ vxr8 update not all dealers are allowed to have it frown

satsuma71

Original Poster:

177 posts

197 months

Tuesday 15th June 2010
quotequote all
Ok, Tech 2 worked the codes are P1632, IMMOBILISER FUEL DISSABLE SIGNAL
And PO689 engine control ignition relay circuit low voltage.
Cant see why one, or both would effect the quality of the idle ?