Discussion
Infinity 6000cs for the fronts (2 piece plus remote tweeters on the top of the doors) with 6002i 3 piece for the rears. Still using standard subwoofer speakers and amp. Kenwood KDC6090R 4 x 50w headunit.
I made up my own adaptor plates using mdf. Bonded the speakers into the adaptor plates, and the adaptor plates into the doors using a hot glue gun, so no rattles and no air leaks for good bass!
I made up my own adaptor plates using mdf. Bonded the speakers into the adaptor plates, and the adaptor plates into the doors using a hot glue gun, so no rattles and no air leaks for good bass!
GSE said:
Infinity 6000cs for the fronts (2 piece plus remote tweeters on the top of the doors) with 6002i 3 piece for the rears. Still using standard subwoofer speakers and amp. Kenwood KDC6090R 4 x 50w headunit.
I made up my own adaptor plates using mdf. Bonded the speakers into the adaptor plates, and the adaptor plates into the doors using a hot glue gun, so no rattles and no air leaks for good bass!
I made up my own adaptor plates using mdf. Bonded the speakers into the adaptor plates, and the adaptor plates into the doors using a hot glue gun, so no rattles and no air leaks for good bass!

thank you. was hoping to use the factory molds but it looks like i cant so time to get the MDF out..
for the record i have kenwood 6.5 inch in there currently on omega adaptor plates but they sound rubish and wish to replace but was hoping to scrap the omega plates as they dont fit well and use the factory ones. looks like i will be making my own like i did for the rear shelf subs..

Nic, dese is the fellas I had in the front, went straight in - perfect fit, no adapters/mdf reqd.
http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
Edited by HSV_Rulz on Saturday 26th June 19:55
HSV_Rulz said:
Nic, dese is the fellas I had in the front, went straight in - perfect fit, no adapters/mdf reqd.
http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
thanks andy, knew there had to be some some where. http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
Edited by HSV_Rulz on Saturday 26th June 19:55
hows the new motor?

the_ferret82 said:
HSV_Rulz said:
Nic, dese is the fellas I had in the front, went straight in - perfect fit, no adapters/mdf reqd.
http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
thanks andy, knew there had to be some some where. http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
Edited by HSV_Rulz on Saturday 26th June 19:55
hows the new motor?



HSV_Rulz said:
the_ferret82 said:
HSV_Rulz said:
Nic, dese is the fellas I had in the front, went straight in - perfect fit, no adapters/mdf reqd.
http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
thanks andy, knew there had to be some some where. http://cgi.ebay.co.uk/INFINITY-6.5%22-Reference-65...
Edited by HSV_Rulz on Saturday 26th June 19:55
hows the new motor?



only knows i don't answer is is foreign ones. if its important leave me a message :PGassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




