Discussion
I've been looking at way's of trying to get more cold air into the standard airbox which has a K&N Panel Filter in it, I tried a very crude second hole mod, and well, to be honest, feked that right up!
What I have come with as something to try is to get hold of a length of 95mm induction hose and run it under the rad and connect it to the front bottom grill, the only problem I can see in doing this is, A) managing to feed the pipe where I want it, avoiding anything hot or moving and B) the loop that will form under the rad.
Question is, has anyone looked at trying to do this and found out it can't be done and will the loop cause me any problems, ie, fill up with water from road spray?
What I have come with as something to try is to get hold of a length of 95mm induction hose and run it under the rad and connect it to the front bottom grill, the only problem I can see in doing this is, A) managing to feed the pipe where I want it, avoiding anything hot or moving and B) the loop that will form under the rad.
Question is, has anyone looked at trying to do this and found out it can't be done and will the loop cause me any problems, ie, fill up with water from road spray?
Monaro5.7 said:
007 VXR said:
Monaro5.7 said:
I have a spare air box as i have an OTR fitted now and the old air box gathering dust 
starting your own shed are you 


And the scrap man will give me £60 for my old cats


007 VXR said:
Monaro5.7 said:
007 VXR said:
Monaro5.7 said:
I have a spare air box as i have an OTR fitted now and the old air box gathering dust 

starting your own shed are you

Well managed to get rid of my engine covers and ma K&N filter
And the scrap man will give me £60 for my old cats

must like pets alot

Well each 2 there own

I had a similar thing on my VT SS that ran to the front bumper with a 2 inch hose. Not really worth the effort to tell you the truth. I just pull the left hand head light out for drag days now and run a custom made stainless box with a pod fitter behind into a 4 inch tube. Be happy to give the dimensions of the airbox if someone wants to make one up.


Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff





good luck with that and await pics with interest