Sagaris's shocker centres wet ??

[yoshizou]

F 340mm R 385mm
I don't understand that meaning of this
Please let me know where to place a particular thing.
Regards
Y

[clive f]

wet would mean car roadworthy, fuel oil, ect ?

but the measurements you have probably found in grahams manual, and I couldn`t make it out either, I recently fitted a set of nitrons and th center of bolts dimensions given are nothing like whats on the car, and did n`t get any answers when I asked the same question, just set your shocks up to the right ride hieght and off you go.

[TVR_owner]

Yoshi,
Off topic.

Hope you're OK and weren't involved I'm that Supercar crash in Japan..

John

[yoshizou]

Hi John
Thank you for your concern !! I was not involved at all in this accident.
Now this is in rendezvous!!

And I am working on set-up the suspension of Sagaris seriously
Cheers
Yoshi

Edited by yoshizou on Monday 5th December 16:40

Edited by yoshizou on Monday 5th December 16:44

Edited by yoshizou on Monday 5th December 17:25

[VARLEYHYD]

yoshizou said:

F 340mm R 385mm
I don't understand that meaning of this
Please let me know where to place a particular thing.
Regards
Y

Hi Y,

Just checked the information with the 'factory engineers' records and the dimensions for the bolt centres should be correct when the car is on level ground with 3/4 full fuel and driver.

I don't recall any problems when I dismantled my car last year on re-assembly, but if you need more dimensions just let me know and I will check my car.

All the best
G

[yoshizou]

Hi Graham
I am working on the suspension set-up while perusing the your great bible!!
Now my Sag fitted the original damper and 18-inch tires with alternative spec springs.
Please let me know more data the dimensions of the distance to the ground from front outriggers and rear outriggers.
Best regards
Yoshi