CF wing mirrors on green Sag

[blackiepaul]

Whos are these and from where?

http://www.autogespot.nl/fotoverslag-tvr-continent...

Green Sag now registered abroad part way down the picture thread

[Quentin1]

This is Olli´s ( http://www.pistonheads.com/gassing/profile.asp?mem...).
Skinning kit from Carbon Mods. Did it by himself.

Regards,
Björn.

Edited by Quentin1 on Tuesday 31st July 13:35

[blackiepaul]

Quentin1 said:

This is Olli´s ( http://www.pistonheads.com/gassing/profile.asp?mem...).
Skinning kit from Carbon Mods. Did it by himself.

Regards,
Björn.

Edited by Quentin1 on Tuesday 31st July 13:35

Thanks for the reply. I though that was the real deal, that being a skin is the best I have seen. I really want the real deal though.

[EvoOlli]

Hello Paul,

yes, it's only skinned, but self made....have to do it again, because I used a Resin which isn't heat proof enough....it got a little wavy in the hot sun.

Oliver


BTW, not green, it's Reflex Charcoal

[V8 GRF]

There should be some Carbon Wing mirrors available in the next few months I'll let you know.

[alex_gray255]

I would have thought you could obtain the same effect with some CF wrap, surely? Plenty of companies do that and fairly cheaply.

[Buzz Billsberry]

I got quoted £500 for the genuine VW corrado mirrors which are basically the mirrors on the Tamora T350 & sags altho the later sags use an extension on the original VW's

Buzz

[alex_gray255]

CF wrap and then small indicator strips added... Hmmm....

[Laser Sag]

alex_gray255 said:

CF wrap and then small indicator strips added... Hmmm....

Alex at least get your car back from this round of works before starting on the next round.

[alex_gray255]

No, this would just be an idea for the project folder. Its got plenty of stuff in it anyway, far more than I want to do. But still good to keep track of things
that might be good to evaluate as possibles.

[Don1]

Laser Sag said:

alex_gray255 said:

CF wrap and then small indicator strips added... Hmmm....

Alex at least get your car back from this round of works before starting on the next round.