T350 water pipes

[ChrisPap]

Hi guys,

can anyone post a picture of the water pipes that run from the engine forward to the radiator on a T350?

I don't have any pipes myself and am struggling with the silicon hose kit I bought because I don't have what I assume is stainless steel joiner pieces to connect the rubber elbows together.

Anyone know where I can get the steel joiner sleaves?

Thanks,
Chris

[Ant.]

Having done what you have to the Tamora, I would call Tim at ACT products, he is probably best suited to advise and supply what you need.....

[mijtec]

Do you mean these?

http://www.pistonheads.com/sales/4210087.htm

[ChrisPap]

Thanks Mijtec,

do you know if Sag and 350 pipes are the same?

Cheers,
Chris

[GTRene]

don't you need a sort end like this?

otherwise the hose will/can blow off as many turbo hoses do and or heater pipes without that rim.

[Granturadriver]

There are different types of pipes, it depends if you have an early model with upright radiator or the later type with the horizontal rad.

[ChrisPap]

Right you are. It's the laydown horizontal type. If anyone can supply a picture of the pips or even just the engine bay so I know what I'm looking for I would be very greateful!

[mijtec]

If the radiator is layed down they will fit and they will be fine without the expanded ends. I have these on my car.

[ChrisPap]

Mijtec,

are you sure? Is your car a Sag? The Sag has the oil cooler in a different position and the hoses run over the top of the chassis tubes rather than through them.

[slimtater]

Not the easiest of things to photo, especially when you have a huge air intake in the way!

Exhaust side:





Nearside (through the gap in the bonnet):





Offside (note the large blue air intake hose which you probably won't have!):

[ChrisPap]

Slimtater, thanks you very much.I know it's a hard area to photograph but that helps a lot!

[slimtater]

Let me know if you need any other angles.