How do I access my rear lights? - T350.

[Zippee]

Hi all, my right hand brake light holder appears to have come unbonded and has slipped down inside the body. Only way I can see to access this is via the speaker hole which isn't the biggest gap to squeeze my hand into.

[darkmark07]

Hi Tony

I haven't got access to my car at the moment, but I thought that there were 2 covers (one either side) that could be removed.

It's been a while since I had to get access there but I'm pretty sure that it's reasonably straight forward.

Cheers,

Mark

[sanquin]

Yes next to the speakers is an arc that goes from the boot switch to either side and next to that are two (leather) covered removable panels. Like 25cm x 20cm with one curved side. Tail light access is behind those.

[Zippee]

Thangs guys, I'll have a good look tonight but IIRC when I looked the leather panel went in an arc right across the boot - couldn't see any removeable panels. I'll recheck

[sanquin]

I quickly painted in the first T350 boot pic I culd find online: The removable panel is the one the big arrow points at. You need to move it a bit sideways because the panel has a pointy bit which jams in behind the arc where the small arrow is.

[Zippee]

Hmmm. Mines carpet there, I'll have a fiddle and see if it moves.

[TVR nut]

Zippee said:

Hmmm. Mines carpet there, I'll have a fiddle and see if it moves.

Mine must be the same as yours. i had to take the whole leather section off that goes round the speakers and over the rear hatch lock(the arc bit), there are 2 screws either side that are into the floor. It was a tight fit to get it off but i could see no other way.

What kind of bonding are you going to use to put the light back in? i am going to change mine for LED's but am wondering what to stick the new ones in with, what did the factory use?