Power Steering relay fed from Alternator
Power Steering relay fed from Alternator
Author
Discussion

Ant.

Original Poster:

5,254 posts

303 months

Tuesday 6th November 2012
quotequote all
Have I dreamt it? I am sure I have read on here that someone was going to use an output from the alternator to switch the PS relay, therefore allowing you to also pull the feed supply around to connect on the starter mains...........

Ant.

Original Poster:

5,254 posts

303 months

Tuesday 6th November 2012
quotequote all
Walford said:
Not sure what you mean but I posted that you dont need to run PS when cranking
hence alternator pulls in the PS relay
That is indeed what I meant.....

Which connection on the alternator to feed the relay?

LeeT350c

575 posts

203 months

Wednesday 7th November 2012
quotequote all
IIRC the switch feed for the relay (green wire) comes from the ECU (through a fuse) which outputs after the car has started?

Its main 12v feed is direct off the battery through an 80amp flat fuse.

Cheers

Lee

Barkychoc

7,848 posts

226 months

Wednesday 7th November 2012
quotequote all
I tried using the charge light on a V8S pas conversion and it doesn't work.

Ant.

Original Poster:

5,254 posts

303 months

Wednesday 7th November 2012
quotequote all
LeeT350c said:
IIRC the switch feed for the relay (green wire) comes from the ECU (through a fuse) which outputs after the car has started?

Its main 12v feed is direct off the battery through an 80amp flat fuse.

Cheers

Lee
Switch feed seems to be same as fuel pump, hence the same prime before the engine starts.
Whole point is to move the main 12v feed , so there is less cables in battery area.