Tamora wiring loom

[domgul]

Hi There
Can anybody supply me with a copy of the Tamora wiring loom, im in Switzerland so pdf would be good.My existing wiring loom was repaired,since its installation i have at least 2 warining alarms/codes, 1 is efi,1 oil pressure,1 oil temp.
The warnings can be deleted with the 2 buttons on back of the steering wheel, but on the dash readout i have 0 oil temp and oil pressure stays at 16, doesnt alter.
Are these problems simply a wire/wires wrongly connected somewhere in the engine bay ? prior to loom removali had no warnings.
Thanks for all help,greatly appreciated.
Regards
Dominic

[domgul]

Hi There
Just an update on my situation with the Tamora.With a friend we found out that the loom was not the problem ! The oil pressure switch was faulty (1 year old)a new one cured the oil pressure fault, i am now waiting for an oil temp sender which will probably cure the second fault, oil temp.With these faults fixed the efi fault will also dissapear.
Seems strange that both oil pressure/temp sender units are defect,car has been sitting for ca 2 months while an mechanic here has been trying to resolve these problems !!!!
Is it somehow possible to damage these 2 sender units by installing/removing wiring looms , wrong wiring up ?
Thanks
Regards
Dominic