Adjusting the pedal box
Discussion
Up until now I've been pretty happy with the driving position but have not tried to re-position the pedal box. I assume the "standard" position is the middle one and it can be adjusted nearer and further away from the driver's seat? My seat is currently hard back against the roll cage and I'm considering moving the peadals forward to allow me to set the seat slightly forward to clear the roll bar. Has anyone tried to do this and if so is it easy and how much does the pedal box move by?
Being a "short arxe" I moved the pedel box nearer to the seat, pig of a job as you need small hands to get the bolts back in place (took me 2 hours). There are 3 positions and factory fit is in the middle.
If you look underneath the car where the pedal box locates you will see the pre drilled holes in the metal plate, you will need to drill the floor (from underneath) to relocate the bolts.
Movement up or down will give you an extra inch either way, and I am told an extra inch matters!!
If you look underneath the car where the pedal box locates you will see the pre drilled holes in the metal plate, you will need to drill the floor (from underneath) to relocate the bolts.
Movement up or down will give you an extra inch either way, and I am told an extra inch matters!!
maddog-uk said:
If I remember rightly there was quite a few settings.
SHIFTY said:
There are 3 positions and factory fit is in the middle.
maddog-uk said:
It moves a lot.
SHIFTY said:
Movement up or down will give you an extra inch either way
Thanks. I think your answers pretty well match up. Sounds like it may be worth getting the dealer to do the job though, I don't fancy drilling up through the floor.
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


