Need to swap exhausts for track day. Easy to do?
Discussion
Evenin' All,
Have a track day coming up in the Tamora and I need to put the standard back box on instead of the sports exhaust to get through the noise test.
First time I've tried it so if anyone has any tips or tricks would be much appreciated. Do I need to take the rear splitter off or can I work round it?
Thanks in advance,
Sam
Have a track day coming up in the Tamora and I need to put the standard back box on instead of the sports exhaust to get through the noise test.
First time I've tried it so if anyone has any tips or tricks would be much appreciated. Do I need to take the rear splitter off or can I work round it?
Thanks in advance,
Sam
Templedog said:
Evenin' All,
Have a track day coming up in the Tamora and I need to put the standard back box on instead of the sports exhaust to get through the noise test.
First time I've tried it so if anyone has any tips or tricks would be much appreciated. Do I need to take the rear splitter off or can I work round it?
Thanks in advance,
Sam
Its easier to do without the splitter in place, its also easier with two people - one to hold bits in place the other to work the spannersHave a track day coming up in the Tamora and I need to put the standard back box on instead of the sports exhaust to get through the noise test.
First time I've tried it so if anyone has any tips or tricks would be much appreciated. Do I need to take the rear splitter off or can I work round it?
Thanks in advance,
Sam
Templedog said:
Thanks Andy, knew I could rely on Mr Tamora for advice....:0)
Any major pitfalls to avoid.....? Roughly how long should I expect it to take?
Should take less than an hour. Can be a bit of a pig to get the hangers on/off the rubbers but a bit of lube will sort this. Sometimes the bolts on the splitter have seen better days so its worth replacing with new stainless ones. Be careful when you remove the exhaust heat shield from under the front bolts on the exhaust mounts, it will catch on the body and scratch it. Make it the last/first job when re-fitting the splitter.Any major pitfalls to avoid.....? Roughly how long should I expect it to take?
Shep
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


