Interior Courtesy Light
Discussion
Hi
I am looking to check the wiring on my T350 (same as Sag/Tam I think) interior light, which has three feeds, ie red, purple/red and black, being I assume perm live, switched live and neutral. Does anyone know which wire goes into which terminal on the light (there are two thick terminals and a very thin one.
A guide picture would be most useful. I looked in my Sagaris workshop manual but the picture is a little small to make out
(Graham V. if you have a bigger pic that would be great 
Thanks
Nigel
I am looking to check the wiring on my T350 (same as Sag/Tam I think) interior light, which has three feeds, ie red, purple/red and black, being I assume perm live, switched live and neutral. Does anyone know which wire goes into which terminal on the light (there are two thick terminals and a very thin one.
A guide picture would be most useful. I looked in my Sagaris workshop manual but the picture is a little small to make out
(Graham V. if you have a bigger pic that would be great 
Thanks
Nigel
Nigeyboy said:
Hi
I am looking to check the wiring on my T350 (same as Sag/Tam I think) interior light, which has three feeds, ie red, purple/red and black, being I assume perm live, switched live and neutral. Does anyone know which wire goes into which terminal on the light (there are two thick terminals and a very thin one.
A guide picture would be most useful. I looked in my Sagaris workshop manual but the picture is a little small to make out
(Graham V. if you have a bigger pic that would be great 
Thanks
Nigel
Haven't looked at the interior light in the Tamora, but those colours are the same as the Griff interior lights, in which the Red goes by itself, as the other two are both grounds (one for the doors and one for the permanent switch)I am looking to check the wiring on my T350 (same as Sag/Tam I think) interior light, which has three feeds, ie red, purple/red and black, being I assume perm live, switched live and neutral. Does anyone know which wire goes into which terminal on the light (there are two thick terminals and a very thin one.
A guide picture would be most useful. I looked in my Sagaris workshop manual but the picture is a little small to make out
(Graham V. if you have a bigger pic that would be great 
Thanks
Nigel
Do you have a pic of the light to put up here?
Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


