wiring information

[SteveSPG]

can anyone point me to a wiring loom diagram for the tamora? presume it is close to the other t cars.


specifically looking for engine loom/dash/ec/bulkhead pin information

[nrick]

Hi

I haven't been able to find one for any of the T cars, would be a useful addition to the GV manual. I have used the cerb one as a rough guide. I have an MBE wiring diagram, but no full loom.

If you find one could you let me know, ta.

[stlol]

There is some wiring info for the Tuscan here, not sure if its what your after.
http://www.mytuscan.co.uk/downloads.php

[SteveSPG]

nrick said:

Hi

I haven't been able to find one for any of the T cars, would be a useful addition to the GV manual. I have used the cerb one as a rough guide. I have an MBE wiring diagram, but no full loom.

If you find one could you let me know, ta.

can you share the cerb one, it would be a useful place to start?

[SteveSPG]

stlol said:

There is some wiring info for the Tuscan here, not sure if its what your after.
http://www.mytuscan.co.uk/downloads.php

those help a lot, thank you

i have asked the original loom manufacturers if they would share the information...bit of a long shot, but lets see

[SteveSPG]

based on the info on the tuscan pages, i have this info regarding the tam loom plug. (the 24 pin plug that connects the engine and ECU to the main loom

i need to find out if the ecu ?

switches fan relays to earth to turn the fans on or provides a liv feed
switches the fuel pump relay to earth to turn the fans on, or provides a live feed
switches the shift light to earth to turn it on, or provides a live feed.

also,

pin 13..i assume is an earth to the ecu to switch on the dash warning lamp for the ecu, but i am not sure

pin 22,23,24...i can't find any information

appreciate any information anyone has before i pull out the fuse board and relays etc to trace everything








pin Wire size (mm2) colour on tvr harness plug use queries
1 2.5 Wh/Rd mil cc starter
2 1.5 Rd mil ee 12v to coils
3 NC
4 NC
5 0.75 Yel/Blk ecu 25 fuel pump drive switched live or switched earth?
6 0.75 Gn/Pk ecu 6 rad fan 2 switched live or switched earth?
7 0.75 Rd mil dd power to lambda
8 0.75 Bn/Wh ecu 42 ac acqn
9 0.75 Yel mil t 12v to alternator from warning lamp
10 NC
11 1.5 Rd mil u 12 v to injectors
12 0.75 Or ecu 44 shift lamp from ecu switched live or switched earth?
13 0.75 Bk ecu 14 ???
14 0.75 Vt/Bk ecu 24 ecu fault to dash
15 1.5 Wh/Bk ecu 33 tacho
16 0.75 Gn/Pk ecu 41 rad fan 1 switched live or switched earth?
17 0.5 Wh ecu 52 12v ecu power
18 0.75 Wh mil m power to ac clutch
19 0.75 Bl mil a ?? ecu pin 23 oil pressure switch
20 0.75 Bl mil k coolant temp to dash
21 0.75 Bl mil l oil temp to dash
22 0.75 Wh/Rd ecu 45 ???
23 0.75 Wh/Gn ecu 46 ???
24 0.75 Bk/Wh ecu 12 ???

Edited by SteveSPG on Tuesday 18th June 21:32

[SteveSPG]

nrick said:

Hi

I haven't been able to find one for any of the T cars, would be a useful addition to the GV manual. I have used the cerb one as a rough guide. I have an MBE wiring diagram, but no full loom.

If you find one could you let me know, ta.

the MBE wiring diagram, does it elaborate on the missing info i need for some of my connectors?