Fuel pressure check

[Ant.]

Any ideas on where and how to tap in to check/monitor fuel pressure on a Tamora?
Need to check things over at around/above 7k.

[Tom The Cat]

Hi Ant

No immediate - solution but maybe a possibility, as could go.
I think you need to build an adapter with (ON / OFF)Switch , where the fuel line is connected to the Fuelrail. In this adapter, you bring to the pressure measuring tool.
I had to measure the fuel pressure on my TR6, because he was not running properly.
There I made an adapter to measure the fuel pressure.
As a T-Piece that is does integrate into the existing pipe.
Possible ,too , to make a Pressure-Sensor with an electronic Gauge in this T-Piece ...
If it is what you want to know?

hope these helps ...
TTC

[EvoOlli]

At the end of the fuel rail, there is a screw on the under side of the rail, short before the end of the rail. It's a screw with a diameter of approx. 8-10mm, if I remember correct....

[Ant.]

EvoOlli said:

At the end of the fuel rail, there is a screw on the under side of the rail, short before the end of the rail. It's a screw with a diameter of approx. 8-10mm, if I remember correct....

You do remember correctly....just found what you have described.


Thanks

Edited by Ant. on Tuesday 4th June 22:05

[Ant.]

So to save me taking the plug out just yet, does anyone know the thread size of the pressure test point?

[Ant.]

Bump...