stick on front no. plate over armourfend

[MOM]

hi, have had enough of the bendy plate stuck on with dble sided tape on the nose of my t350 so wish to go down the aerodynamic stick on route. Anyway car has armourfend on it so spoke to armourfend to find out what to use to get the foam tape off (very helpful) & whether there is a prob with a vinyl stick on.
Not a problem apart from its a one chance job. Now i am normally pretty good at things but this is too big a risk.
Any t350 owners with vinyl plates who could recommend someone.
I am in suffolk
Regards
Mark

[ShiDevil]

MOM said:

hi, have had enough of the bendy plate stuck on with dble sided tape on the nose of my t350 so wish to go down the aerodynamic stick on route. Anyway car has armourfend on it so spoke to armourfend to find out what to use to get the foam tape off (very helpful) & whether there is a prob with a vinyl stick on.
Not a problem apart from its a one chance job. Now i am normally pretty good at things but this is too big a risk.
Any t350 owners with vinyl plates who could recommend someone.
I am in suffolk
Regards
Mark

Several of us have gone to Sign Team, based in Thorney near Peterborough, who do anything vinyl, wrapping etc. Neil there can help you out. Having said that, measure it up properly, stick it on, use something like a credit card to take the air bubbles out... Job Done

Edited by ShiDevil on Friday 4th October 08:05

[billy no brakes]

You can order them from these people

https://www.craigsplates.com/index.php

When you stick it on just spray the area with loads of water and you can slide it into place then smooth it out with a cloth or a credit card

[MOM]

Cheers.
Did wonder about wetting it first

[MOM]

Cheers.
Did wonder about wetting it first