are you ready for a laugh - answers on a postcard...

[SteveSPG]

my Tam is getting some trim work from Dave the trimmer.

i have a "slight" preference for the later style dash with a surround around the radio, but its only a slight preference. just after the fibreglass section that the glovebox and radio slot into, not the dash pod/instruments/glovebox/switches/radio...just the dash

found one in a breakers.


asked how much

have a guess.....

Edited by SteveSPG on Monday 24th March 17:55

[GG33]

£300??

[chris watton]

If the silly prices for breaking TVR parts on EBay are anything to go by, I'd say way too much.

[Ant.]

£450 ???

[Geoff Ashcroft]

No doubt made from unobtanium - for everything else, there's mastercard......
£150.

[jrb43]

Did the moulding "just need some simple repairs and paint to get it back on the road?"

[SteveSPG]

jrb43 said:

Did the moulding "just need some simple repairs and paint to get it back on the road?"

didn't get that far with the enquiry

nobody's close yet

[chris watton]

£850?

[SteveSPG]

chris watton said:

£850?

getting closer

[alex_gray255]

The whole front dash - upper and lower part + the trimming?

Probably about £1500-2000

[SteveSPG]

alex_gray255 said:

The whole front dash - upper and lower part + the trimming?

Probably about £1500-2000

no, just the supply of the single piece fibreglass dash from the breaker that holds the glovebox and stereo and mirror switch

[alex_gray255]

SteveSPG said:

no, just the supply of the single piece fibreglass dash from the breaker that holds the glovebox and stereo and mirror switch

So, the lower part without the trimming - £1200 or so with VAT etc.

[V8BJC]

SteveSPG said:

chris watton said:

£850?

getting closer

Seriously.

Was his name Dick Turpin?

[Targarama]

Hmm, maybe I will sell mine as parts when the time comes

[rhyspw]

alex_gray255 said:

So, the lower part without the trimming - £1200 or so with VAT etc.

Crazy money for a bit of fibreglass....

[SteveSPG]

i feel some "moulding tools" coming on......

[jpp]

Up there with air box covers then. Not sure my moulding skills will be good enough to copy that though!

[SteveSPG]

The answer is




1000




Going to have a go at making moulds instead.

[SteveSPG]

[chris watton]

just buy a head unit with a flip-screen - you'll never notice then...