horn push

[SteveSPG]

I've fitted a momo trek r steering wheel, which is great, but has a momo centre badge

id like to refit a tvr badge, but can't find a centre for the mom that would work. with a resin type tvr badge. any ideas from those that have done this already

Edited by SteveSPG on Sunday 1st February 19:09

[chris watton]

I too have the same problem, and have the same question as Steve.

[alex_gray255]

I did it.

I measured the diameter then got a wheel centre badge from Power and then just fitted it over the
horn. Works perfect.

https://www.youtube.com/watch?v=kzmY3e0bpak (about 5-6s in)

Better video...

https://www.youtube.com/watch?v=No7bhBBqXa8

Edited by alex_gray255 on Saturday 31st January 19:21

Edited by alex_gray255 on Saturday 31st January 19:29

[ShiDevil]

I looked at both options, fitted the TVR badge then thought, hang on Momo is a recognised Motorsport name, stick with it and drive

[shep1001]

Done it. Get the Mrs hair dryer out, melt the glue by heating it up. Remove momo badge & replace with the TVR badge you have removed in the same way. You may need a little glue to fix the bade back to the horn push - I went with silicone.

Shep

Edited by shep1001 on Saturday 31st January 22:11

[ShiDevil]

Hi,

Another option is:

Buy Blank Black Momo Centre Badge, which fits centre of Trek
R better;

Buy TVR Wheel Logo off eBay;

Stick Logo on centre and fit in Trek R;

Looks much better and fits perfectly.

[DJR 7]

ShiDevil said:

Hi,

Another option is:

Buy Blank Black Momo Centre Badge, which fits centre of Trek
R better;

Buy TVR Wheel Logo off eBay;

Stick Logo on centre and fit in Trek R;

Looks much better and fits perfectly.

Not a brilliant pic but I did exactly this

[SteveSPG]

is that one of these??

http://www.ebay.co.uk/itm/CAR-HORN-PUSH-BUTTON-FIT...

[monsy]

Hi what i did was run a sharp knife under the TVR badge it comes off easy then restick on the Momo wheel job done

[SteveSPG]

hmmm mine doesn't have a momo adhesive badge, its pressed metal thats painted, so i can't adhere another one on there

[DJR 7]

SteveSPG said:

is that one of these??

http://www.ebay.co.uk/itm/CAR-HORN-PUSH-BUTTON-FIT...

It does say that if you don't choose a colour a plain black one will be sent, I guess that would do the trick

D

[ShiDevil]

monsy said:

Hi what i did was run a sharp knife under the TVR badge it comes off easy then restick on the Momo wheel job done

I tried this. Didn't look that great, didn't feel that great, tbh.

Much prefer sticking with the Momo Logo or get the black Momo horn and use the wheel logo. Fits perfectly then.

[alex_gray255]

I thought the black on silver looked best as it matched the TVR logo, but each to their own, eh?