Mistedup rear lights
Discussion
Hi Simon,
Try removing the small inspection panel inside the wheel arch. I did just that, and found that not one but two of the light units had "come unstuck" as they were only held in with two blobs of Polyester bonding paste.
I realy don't know why they do this, as it is a total crab way of mounting them, i guess that it's the usual case of...'What the eye don't see'
I was getting water and a lot of dust in mine,but after bonding them back in again, i have had no more probs.
Dave
Try removing the small inspection panel inside the wheel arch. I did just that, and found that not one but two of the light units had "come unstuck" as they were only held in with two blobs of Polyester bonding paste.
I realy don't know why they do this, as it is a total crab way of mounting them, i guess that it's the usual case of...'What the eye don't see'
I was getting water and a lot of dust in mine,but after bonding them back in again, i have had no more probs.
Dave

Gassing Station | Tamora, T350 & Sagaris | Top of Page | What's New | My Stuff


